eagleJSONexporter_v1_0.ulp

#usage "<b>Generate IDF files from CADSoft Eagle</b><p>\n"
"Run ULP on board file to generate IDF 4 files for import to CAD tools.<BR>"
"Version: 0.1 - Initial release - 04-27-2018<br/>"
"</p>"
"<author>Author: lagnajeet@gmail.com</author>"

#require 5.1000
string version = "1.0";  //ulp version

//vars used for the text dialog
string TextMessageDialog;  //used to store text shown to user

string HeightHtmlTable = "";

string BoardThickness = "1.6";  //mm
string WireLayer = "20";
string status_msg="<font color='green'>...</font>";

string PackageOutlines[];  //used to hold outlines of packages
string Part_Name_array[];
int parts_Count=0;
int PackageCounter = 0; //keeps track of how many entries in packages outline array

string NULL_HEIGHT = "0.000000";  //used for null heights

int silkscreen=1;

//debug flags
int Debug = 1;   //general Debug flag
int startElementID = 2500;		//change it if you want. Best will be to randomize it.
int elementNumber = 0;
int Elec_Part_Insts=0;
int Elec_Part_Defs = 0;
//-----------------------------------------------------------------------------
// subroutines
//-----------------------------------------------------------------------------
void updateStatus(string message,string color,int isbold,int italics)
{
	status_msg = "<font color='"+color+"'>";
	if(isbold!=0)
		status_msg+="<b>";
	if(italics!=0)
		status_msg+="<i>";
	status_msg+=message;
	if(italics!=0)
		status_msg+="</i>";		
	if(isbold!=0)
		status_msg+="</b>";
	status_msg+="</font>";
}
string itos(int num) {
     string temp;

     sprintf(temp, "%d", num);

     return temp;
}

string rtos(real num) {
     string temp;

     sprintf(temp, "%f", num);

     return temp;
}

int IsInt(string str) {
     //returns 1 if int. 0 if not string

     //first check to make sure its not "0" which Is the fail mode for the cast
     if (str == "0") {
          return 1;
     } else if (strtol(str) != 0) {
          return 1;
     } else {
          return 0;
     }

}  //end IsInt

int IsReal(string str) {
     //returns 1 if int. 0 if not string

     //first check to make sure its not "0.0" which Is the fail mode for the cast
     if (str == "0.0") {
          return 1;
     } else if (strtod(str) != 0.0) {
          return 1;
     } else {
          return 0;
     }

}  //end IsInt

int CompareReals(real n1, real n2) {
     string n1s;
     string n2s;

     sprintf(n1s, "%1.2f", n1);
     sprintf(n2s, "%1.2f", n2);

     if (n1s == n2s) {
          return 1;
     } else {
          return 0;
     }
}

string GetBoardThickness() {
     //make sure there Is value for board thickness
     if (BoardThickness == "") {
          BoardThickness = "1.6";
     }

     //check if first char Is decimal and if it Is then add 0
     char dec = '.';
     int pos = strchr(BoardThickness, dec);

     if (pos == 0) {
          BoardThickness = "0" + BoardThickness;
     }

     //return form value
     return BoardThickness;
}  //end func

string GenerateID()
{
	elementNumber = elementNumber + 1;
	return itos(startElementID + elementNumber);
}

string GetBoardUnits() {

     /*
      GRID_UNIT_MIC microns
      GRID_UNIT_MM millimeter
      GRID_UNIT_MIL mil
      GRID_UNIT_INCH inch
      */

     /* force to mm
      string unitsMap[] = { "MIC", "MM", "MIL", "IN" };

      board(B) {
      return unitsMap[ B.grid.unit ];
      }
      */

     return "MM";
}

real BackConvertDimensions(real mmDim) {
     real boardDim;
     int unitsInt;

     //get board dimensions
     board(B)
     {
          unitsInt = B.grid.unit;
     }

     /*
      GRID_UNIT_MIC microns
      GRID_UNIT_MM millimeter
      GRID_UNIT_MIL mil
      GRID_UNIT_INCH inch
      */

     switch (unitsInt) {
     case 0:
          //micron
          boardDim = mmDim * 1000;
          break;
     case 1:
          //mm
          boardDim = mmDim;
          break;
     case 2:
          //mil
          boardDim = mmDim * 39.3700787;
          break;
     case 3:
          //inch
          boardDim = mmDim * 0.0393701;
          break;

     }  //end switch

     //string unitsMap[] = { "MIC", "MM", "MIL", "IN" };

     //dlgMessageBox( "MM:" + rtos( mmDim ) + ", " + unitsMap[ unitsInt ] + ": " + rtos( boardDim ) );

     return boardDim;

}  //end func

real GetDimInBoardUnits(int dim) {
     int unitsInt;
     real convDim;

     /* removed for force to mm
      board(B) {
      unitsInt = B.grid.unit;
      }

      switch( unitsInt ){
      case 0:
      convDim = u2mic( dim );
      break;
      case 1:
      convDim = u2mm( dim );
      break;
      case 2:
      convDim = u2mil( dim );
      break;
      case 3:
      convDim = u2inch( dim );
      break;

      }  //end switch
      */

     convDim = u2mm(dim);

     return convDim;
}  //end func

real GetTolerance() {
     int unitsInt;
     real Tolerance;

     /* removed to force to mm
      board(B) {
      unitsInt = B.grid.unit;
      }

      switch( unitsInt ){
      case 0:
      Tolerance = 100;
      break;
      case 1:
      Tolerance = 0.05;
      break;
      case 2:
      Tolerance = 3.9;
      break;
      case 3:
      Tolerance = 0.004;
      break;

      }  //end switch
      */

     Tolerance = 0.05;

     return Tolerance;
}  //end func

string GetBoardFilename() {
     board(BRD)
     {
          return filename(BRD.name);
     }  //end board
}

string GetBoardDir() {

     board(BRD)
     {
          return filedir(BRD.name);
     }  //end board
}

string GetBoardPath() {

     return GetBoardDir() + GetBoardFilename();

}

string PadBRs( int count ){

     string padding = "";

     for( int i; i < count; i++ ){


          padding += "<BR>";
          }

     return padding;
}

int IsWindows() {
     //Returns 1, if EAGLE Is running under Windows (0 for Linux/Mac)
     if ((strsub(argv[0], 0, 1) == "/") && (strsub(argv[0], 0, 2) != "//"))
          return 0;

     return 1;
}  //end sub


int IsMac(){
     if( (strsub( OS_SIGNATURE, 0, 3 ) == "Mac") ||  (strsub( OS_SIGNATURE, 0, 3 ) == "MAC") )
          return 1;

     return 0;

}

void LaunchBrowser( string url ){

     string launchCmd = "";

     if( IsWindows() ){
          launchCmd = "explorer \"" + url + "\"";
          }
     else if( IsMac() ){
          launchCmd = "open \"" + url + "\"";
          }
     else{
          //assume all others linux
          //if you are on linux then change this line if the buttons dont work
          launchCmd = "xdg-open " + url;
          }


     //run system command
     system( launchCmd );
     }  //end launch browser

string GetFileSeperator() {

     if (IsWindows()) {
          return "\\";
     } else {
          return "/";
     }

}

// Removes carriage returns from a string and replaces with <BR/>
string RemoveCarriageReturns(string dirtyString) {

     string cleanedString;

     for (int i = 0; dirtyString[i]; ++i) {
          if (dirtyString[i] == '\n') {
               cleanedString += "<BR/>";
          } else {
               cleanedString += dirtyString[i];
          }  //end if-else
     }  //end for

     return cleanedString;
}  //end sub

// Removes spaces in string and replaces with <S/>
string RemoveSpaces(string dirtyString) {

     string cleanedString;

     for (int i = 0; dirtyString[i]; ++i) {
          if (dirtyString[i] == ' ') {
               cleanedString += "<S/>";
          } else {
               cleanedString += dirtyString[i];
          }  //end if-else
     }  //end for

     return cleanedString;
}  //end sub

string CleanString(string dirtyString) {

     dirtyString = strupr(dirtyString);

     string cleanedString;

     for (int i = 0; dirtyString[i]; ++i) {
          if (dirtyString[i] == '0' || dirtyString[i] == '1'
                    || dirtyString[i] == '2' || dirtyString[i] == '3'
                    || dirtyString[i] == '4' || dirtyString[i] == '5'
                    || dirtyString[i] == '6' || dirtyString[i] == '7'
                    || dirtyString[i] == '8' || dirtyString[i] == '9'
                    || dirtyString[i] == 'A' || dirtyString[i] == 'B'
                    || dirtyString[i] == 'C' || dirtyString[i] == 'D'
                    || dirtyString[i] == 'E' || dirtyString[i] == 'F'
                    || dirtyString[i] == 'G' || dirtyString[i] == 'H'
                    || dirtyString[i] == 'I' || dirtyString[i] == 'J'
                    || dirtyString[i] == 'K' || dirtyString[i] == 'L'
                    || dirtyString[i] == 'M' || dirtyString[i] == 'N'
                    || dirtyString[i] == 'O' || dirtyString[i] == 'P'
                    || dirtyString[i] == 'Q' || dirtyString[i] == 'R'
                    || dirtyString[i] == 'S' || dirtyString[i] == 'T'
                    || dirtyString[i] == 'U' || dirtyString[i] == 'V'
                    || dirtyString[i] == 'W' || dirtyString[i] == 'X'
                    || dirtyString[i] == 'Y' || dirtyString[i] == 'Z'
                    || dirtyString[i] == '_' || dirtyString[i] == '-'
                    || dirtyString[i] == ' ') {

               cleanedString += dirtyString[i];
          } else {
               cleanedString += "_";
          }  //end if-else
     }  //end for

     return cleanedString;
}  //end sub

// Removes spaces in string and replaces with <S/>
string ReplaceSpaceWithUnderscore(string dirtyString) {

     string cleanedString;

     for (int i = 0; dirtyString[i]; ++i) {
          if (dirtyString[i] == ' ') {
               cleanedString += "_";
          } else {
               cleanedString += dirtyString[i];
          }  //end if-else
     }  //end for

     return cleanedString;
}  //end sub

//  0-9, letters, dashes, and underscores are always safe.
// Reads in file and converts it to be used in a html form submit
string ParseFileToHtmlForm(string filePath) {

     string fileContents;

     int in = fileread(fileContents, filePath);

     fileContents = RemoveCarriageReturns(fileContents);

     fileContents = RemoveSpaces(fileContents);

     //dlgMessageBox( "File input value:" + in );

     return fileContents;
}  //end sub

string ParseStringToHtmlForm(string input) {

     return RemoveSpaces(RemoveCarriageReturns(input));

}  //end sub

real GetDistBetweenPts(real x1, real y1, real x2, real y2) {
     //dist = sqrt( ( x2 - x1 )^2 + ( y2 - y1 )^2 )

     return sqrt(pow((x2 - x1), 2) + pow((y2 - y1), 2));

}  //end sub

void WriteToFile(string filePath, string fileContents) {

     output(filePath, "wt")
     {
          printf(fileContents);
     }
}   //end sub


string GetElementHeightAttr( UL_ELEMENT E ){
     /* checks for attribute named HEIGHT.
      * casts height string to real to handle any invalid values. sets to 0 if not value.
      * returns height
      */

     string height = NULL_HEIGHT;

     //check for element height
     E.attributes(A)
     {
          if (strupr(A.name) == "HEIGHT") {
               if ( strtod(A.value) <= 0.0) {
                    height = NULL_HEIGHT;
               } else {
                    height = rtos( strtod( A.value ) );
               }  //end if-else
          }  //end if
     }  //end loop thru attributes

     return height;
}   //end sub

//-----------------------------------------------------------------------------
// emp subroutines
//-----------------------------------------------------------------------------
string GetDateTime() {

     //time for date.time in header
     int now = time();
     string dateStr;

     sprintf(dateStr, "%d/%02d/%02d.%02d:%02d:%02d", t2year(now), t2month(now),
               t2day(now), t2hour(now), t2minute(now), t2second(now));

     return dateStr;

}  
string GetComponentOutline(string footprint1 , string altname , string packageName , string units , string height) 
{

     //package array = [ { packname1, maxX, maxY, minX, minY },
     //                          { packname2, maxX, maxY, minX, minY }
     //                         ]

     //board->Library->Package->Wires

     int foundPackage = 0;

     //lookup package name in array
     string packageNameLookup = lookup(PackageOutlines, packageName, 0);

     //check if found in lookup. if not then generate and put in array
     if (packageNameLookup == "") {
          //if package not in lookup then generate it

          //init max/min values
          real maxX = 0, maxY = 0, minX = 0, minY = 0;

          //loop thru all Libraries to find packagename
          board(B)
          {

               //go into library
               B.libraries(LBR)
               {

                    //loop thru packages in library
                    LBR.packages(P)
                    {
                         //if package name matches the one we are looking for then process it
                         if (P.name == packageName) {
                              //check min/ax for each of
                              //circles() UL_CIRCLE - C.x, C.y, C.radius, C.width)
                              //holes() UL_HOLE
                              //polygons() UL_POLYGON -> wires()
                              //rectangles() UL_RECTANGLE - R.x1, R.y1, R.x2, R.y2);
                              //wires() UL_WIRE

                              //set found package flag
                              foundPackage = 1;

                              //used to capture first loop of data
                              int loopCounter = 0;
                              real w2;  //holds 1/2 of width

                              //loop thru wires and Get max/min x/y
                              //do wires first to take care of loopCounter == 0 case
                              P.wires(W)
                              {
                                   //get first data point
                                   if (loopCounter == 0) {
                                        w2 = W.width / 2;
                                        minX = GetDimInBoardUnits(
                                                  min(W.x1 - w2, W.x2 - w2));
                                        minY = GetDimInBoardUnits(
                                                  min(W.y1 - w2, W.y2 - w2));
                                        maxX = GetDimInBoardUnits(
                                                  max(W.x1 + w2, W.x2 + w2));
                                        maxY = GetDimInBoardUnits(
                                                  max(W.y1 + w2, W.y2 + w2));
                                   }

                                   if (W.arc) {
                                        w2 = W.width / 2;
                                        if (W.arc.angle2 > 360)
                                             maxX = max(maxX,
                                                       GetDimInBoardUnits(
                                                                 W.arc.xc + W.arc.radius));
                                        else if (((W.arc.angle1 < 90)
                                                  && (W.arc.angle2 > 90))
                                                  || (W.arc.angle2 > 450))
                                             maxY = max(maxY,
                                                       GetDimInBoardUnits(
                                                                 W.arc.yc + W.arc.radius
                                                                           + w2));
                                        else if (((W.arc.angle1 < 180)
                                                  && (W.arc.angle2 > 180))
                                                  || (W.arc.angle2 > 540))
                                             minX = min(minX,
                                                       GetDimInBoardUnits(
                                                                 W.arc.xc - W.arc.radius
                                                                           - w2));
                                        else if (((W.arc.angle1 < 270)
                                                  && (W.arc.angle2 > 270))
                                                  || (W.arc.angle2 > 630))
                                             minY = min(minY,
                                                       GetDimInBoardUnits(
                                                                 W.arc.yc - W.arc.radius
                                                                           - w2));
                                   }
                                   else {
                                        //handle non arc wires
                                        minX = min(minX, GetDimInBoardUnits(W.x1));
                                        minY = min(minY, GetDimInBoardUnits(W.y1));
                                        maxX = max(maxX, GetDimInBoardUnits(W.x1));
                                        maxY = max(maxY, GetDimInBoardUnits(W.y1));
                                   }  //end if-else

                                   loopCounter++;
                              }  //end wires

                              //UpdateBBoxBox(C.x - C.radius - w2, C.y - C.radius - w2, C.x + C.radius + w2, C.y + C.radius + w2);
                              // xmin, ymin, xmax, ymax
                              P.circles(C)
                              {
                                   w2 = C.width / 2;
                                   minX = min(minX,
                                             GetDimInBoardUnits(C.x - C.radius - w2));
                                   minY = min(minY,
                                             GetDimInBoardUnits(C.y - C.radius - w2));
                                   maxX = max(maxX,
                                             GetDimInBoardUnits(C.x + C.radius + w2));
                                   maxY = max(maxY,
                                             GetDimInBoardUnits(C.y + C.radius + w2));

                                   loopCounter++;
                              }  //end circles

                              //P.holes(){} - Not required. These are solder masks

                              P.polygons(POLY)
                              {
                                   POLY.wires(PW)
                                   {
                                        minX = min(minX, GetDimInBoardUnits(PW.x1));
                                        minY = min(minY, GetDimInBoardUnits(PW.y1));
                                        maxX = max(maxX, GetDimInBoardUnits(PW.x1));
                                        maxY = max(maxY, GetDimInBoardUnits(PW.y1));
                                        loopCounter++;
                                   }  //end wires in polygon
                              }   //end polgons

                              P.rectangles(R)
                              {
                                   minX = min(minX,
                                             min(GetDimInBoardUnits(R.x1),
                                                       GetDimInBoardUnits(R.x2)));
                                   minY = min(minY,
                                             min(GetDimInBoardUnits(R.y1),
                                                       GetDimInBoardUnits(R.y2)));
                                   maxX = max(maxX,
                                             max(GetDimInBoardUnits(R.x1),
                                                       GetDimInBoardUnits(R.x2)));
                                   maxY = max(maxY,
                                             max(GetDimInBoardUnits(R.y1),
                                                       GetDimInBoardUnits(R.y2)));

                                   loopCounter++;
                              }  //end rectangles

                              //break out of loop since match found
                              break;

                         }  //end if for package name match
                    } //end packages loop
               }  //end Libraries loop
          }  //end board loop

          //make sure found match. if not then put in default values
          string temp;

          if (foundPackage) {
               //load to array
               sprintf(temp, "%s\t%f\t%f\t%f\t%f", packageName, maxX, maxY, minX,
                         minY);

          } else {
               sprintf(temp, "%s\t%f\t%f\t%f\t%f", packageName, maxX, maxY, minX,
                         minY);
          }  //end if-else for found package check

          //add data to package outline so it can be reused in future
          PackageOutlines[PackageCounter] = temp;

          PackageCounter++;
     }  //end if for lookup check

     //generate outline data. first line is footpring, name, and units
	 string temp_height;
     string outline = "\n\t\t{\n\t\t\"Entity_ID\":\""+ GenerateID() +"\",\n\t\t\"Part_Name\":\""+footprint1+"\",\n\t\t\"Units\":\"Global\",\n\t\t\"Type\":\"Unspecified\",\n\t\t\"Shape\":\n\t\t\t{\n\t\t\t\"Extrusion\":\n\t\t\t\t{\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",";

     //set default height based on units
     if (units == "MM") {
          temp_height = height ;

          //check if height set. if not set to 1.0
          /*if (height == "1.0") {
               outline += " 1.00\n";
          }
          else {
               outline += " " + height + "\n";
          }*/
     }
     /*else if (units == "THOU") {
          //check if
          if (height == "0.0") {
               outline += " 39.37\n";
          }
          else {
               outline += " " + height + "\n";
          }
     }
     */
     else {
          //treat as MM
          //check if
          if (height == "1.0") {
               temp_height= "1.00";
          } else {
               temp_height= height;
          }
     }  //end if-else

	outline += "\n\t\t\t\t\"Top_Height\":"+temp_height+",\n\t\t\t\t\"Bot_Height\":0,\n\t\t\t\t\"Outline\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Line_Color\":[0.0, 0.0, 0.0],\n\t\t\t\t\t\t\"Fill_Color\":[0.0, 0.0, 0.0],\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n";
     //map in max/min data
     string maxX = lookup(PackageOutlines, packageName, 1);
     string maxY = lookup(PackageOutlines, packageName, 2);

     string minX = lookup(PackageOutlines, packageName, 3);
     string minY = lookup(PackageOutlines, packageName, 4);

     /*rectangle based on max/min values. start in upper left and move clockwise
      0   minX   maxY
      0   maxX   maxY
      0   maxX   minY
      0   minX   minY
      0   minX   maxY
      */

     //if max/min are all zeros then put in 1x1 block
     if (maxX == "0.000000" && maxY == "0.000000" && minX == "0.000000"
               && minX == "0.000000") {
          outline += "\t\t\t\t\t\t\t[1.00, -1.00, 0.0],\n\t\t\t\t\t\t\t[-1.0, -1.0, 0],\n\t\t\t\t\t\t\t[-1.0, 1.0, 0],\n\t\t\t\t\t\t\t[1.0, 1.0, 0],\n\t\t\t\t\t\t\t[1.00, -1.00, 0.0]\n";
     }
     //if they are all the same they also set in 1x1 block so that something is shown
     else if (maxX == minX || maxY == minY) {
          outline += "\t\t\t\t\t\t\t[1.00, -1.00, 0.0],\n\t\t\t\t\t\t\t[-1.0, -1.0, 0],\n\t\t\t\t\t\t\t[-1.0, 1.0, 0],\n\t\t\t\t\t\t\t[1.0, 1.0, 0],\n\t\t\t\t\t\t\t[1.00, -1.00, 0.0]\n";
     }
     //otherwise actual coords provided. use those in output
     else {
          outline += "\t\t\t\t\t\t\t[" + minX + ", " + maxY + ", 0.0],\n\t\t\t\t\t\t\t[" + maxX + ", " + maxY + ", 0],\n\t\t\t\t\t\t\t[" + maxX + ", " + minY + ", 0],\n\t\t\t\t\t\t\t[" + minX + ", " + minY + ", 0],\n\t\t\t\t\t\t\t["+minX+", " + maxY + ", 0.0]\n";
     }   //end if-else

     outline += "\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t}\n\t\t\t},\n\t\t\"Properties\":{\"Part_Number\":\""+altname+"\"}\n\t\t},";
     return outline;
}  //end sub

int searchPartsArray(string data)
{
	for(int i=0;i<parts_Count;i++)
	{
		if(Part_Name_array[i]==data)
		{
			return 1;
			break;
		}
	}
	return 0;
}
string GetEmpElectrical() {
     /*
      .ELECTRICAL
      TSSOP16 NOREFDES MM 4876.80
      0 -2.51 -2.28 0
      0 2.51 -2.28 0
      0 2.51 2.28 0
      0 -2.51 2.28 0
      0 -2.51 -2.28 0
      .END_ELECTRICAL
      */

     string electricalSection;

     string footprint1;
     string altname;
     string height = NULL_HEIGHT;

     string LibraryLookup;

     string components[];

     string component;

     //loop thru elements on board
     board(BRD)
     {

          int i = 0;
			electricalSection = "\t\"Electrical_Part\":\n\t\t[";
          BRD.elements(E)
          {
               height = NULL_HEIGHT;
               //check if library in lookup
      //         LibraryLookup = lookup(Libraries, strupr(E.package.library), 0);
      //         //set footprint and altname based on logic
      //         if (LibraryLookup != "") {
      //              footprint = E.package.name;
      //              altname = E.package.name;
      //              //add comment to emn for debuggin
      //              //placementSection += "#Resistor or rcl library found\n";
      //         } else 
			   if (E.value != "") {
                    altname = E.value;
                    footprint1 = E.package.name;
                    //add comment to emn for debuggin
                    //placementSection += "#E.value present\n";
               } else {
                    //if library Is not in list and the E.value Is blank then concat refid and package name
                    altname = E.name + "_" + E.package.name;
                    footprint1 = E.package.name;
                    //add comment to emn for debuggin
                    //placementSection += "#Fallback logic applied. Not res/rcl and E.value not found.\n";
               }
               altname = CleanString(altname);
               footprint1 = CleanString(footprint1);
               //check if height set for element. if not set then set to NULL_HEIGHT
               height = GetElementHeightAttr( E );

               //add component to height lookup table
               HeightHtmlTable = HeightHtmlTable + "<tr><td>" + E.name
                         + "</td><td>" + altname + "</td><td>" + E.package.name
                         + "</td>";

               //if height is not set then set to default
               if (height == NULL_HEIGHT) {
                    height = "1.0";  //set to value of 1.0
                    HeightHtmlTable = HeightHtmlTable + "<td bgcolor=\"yellow\">" + height + "</td></tr>";
               } else {
                    HeightHtmlTable = HeightHtmlTable + "<td>" + height + "</td></tr>";
               }  //if-else for height value
               component = lookup(components, footprint1 + "~" + altname, 0);
               //if component Is empty then it has not been written out yet.
               if (component == "") 
			   {
					if(searchPartsArray(footprint1)==0)
					{
						Elec_Part_Defs = Elec_Part_Defs + 1;
						//build section by call to GetComponentOutlineDummy( string footprint1, string altname, string units )
						electricalSection += GetComponentOutline(footprint1, altname, E.package.name, GetBoardUnits(), height);
						//add component to components list.
						//components[i] = footprint1 + "~" + altname; - Fix for multi comp and heights
						components[i] = footprint1 + "~" + altname;
						i++;
						Part_Name_array[parts_Count]=footprint1;
						parts_Count++;
					}
               }  //end if
          }  //end loop thru elements
     }  //end loop thru board
	 electricalSection[strlen(electricalSection)-1] = '\0';
	 electricalSection += "\n\t\t]";
     return electricalSection;

}  //end sub

string GetEmpMechanical() {

     return "";
}  //end sub

//-----------------------------------------------------------------------------
// emn subroutines
//-----------------------------------------------------------------------------
string GetEmnHeader(int Elec_Part_Insts, int Elec_Part_Defs) {
     /*
      .HEADER
      BOARD_FILE 3.0 "Commend International >generate_3d_data_v10-5_MJB.ulp V0.9<" 2012/03/21.12:23:10 1
      "untitled.brd" MM
      .END_HEADER
      */

     string boardName;

     //get board name
     board(BRD)
     {
          boardName = filename(BRD.name);
     }

	return "\"IDF_Header\"\n\t:{\n\t\"Version\" :\"V4.0\",\n\t\"Creation_Date_Time\" :\"" + GetDateTime() + "\",\n\t\"Owner_Name\" :\"None\",\n\t\"Owner_Phone\" :\"\",\n\t\"Owner_EMail\" :\"\",\n\t\"Source_App_Type\" :\"ECAD\",\n\t\"Source_App_Vendor\":\"Autodesk\",\n\t\"Source_App_Name\":\"Eagle CAD\",\n\t\"Source_App_Version\":\"V" + version
				   + "\",\n\t\"Source_Tx_Name\":\"Eagle JSON Export\",\n\t\"Source_Tx_Version\":\"V" + version
				   + "\",\n\t\n\t\"Entity_Count\"\n\t\t:{\n\t\t\"Elec_Part_Defs\" :\""+ itos(Elec_Part_Defs) +"\",\n\t\t\"Elec_Part_Insts\" :\""+ itos(Elec_Part_Insts) +"\",\n\t\t\"Mech_Part_Defs\" : \"0\",\n\t\t\"Mech_Part_Insts\" : \"0\",\n\t\t\"Board_Part_Defs\" : \"1\",\n\t\t\"Board_Part_Insts\" : \"1\",\n\t\t\"Board_Assy_Defs\" : \"0\",\n\t\t\"Board_Assy_Insts\" : \"0\",\n\t\t\"Panel_Part_Defs\" : \"0\",\n\t\t\"Panel_Part_Insts\" : \"0\",\n\t\t\"Panel_Assy_Defs\" : \"0\",\n\t\t\"Panel_Assy_Insts\":\"0\"\n\t\t},\n\t\t\n\t\"Comp_Part\"\n\t\t:[\n\t\t\"Annotation\",\n\t\t\"Cavity\",\n\t\t\"Circle\",\n\t\t\"Circular_Arc\",\n\t\t\"Cutout\",\n\t\t\"Electrical_Part\",\n\t\t\"Extrusion\",\n\t\t\"Leader\",\n\t\t\"Material\",\n\t\t\"Mechanical_Part\",\n\t\t\"Pin\",\n\t\t\"Polycurve\",\n\t\t\"Polycurve_Area\",\n\t\t\"Polygon\",\n\t\t\"Polyline\",\n\t\t\"Text\",\n\t\t\"Thermal_Model\",\n\t\t\"Thermal_CV\",\n\t\t\"Thermal_RV\"\n\t\t],\n\t\t\n\t\"Board_Part\"\n\t\t:[\n\t\t\"Annotation\",\n\t\t\"Board_Part\",\n\t\t\"Cavity\",\n\t\t\"Circle\",\n\t\t\"Cutout\",\n\t\t\"Extrusion\",\n\t\t\"Figure\",\n\t\t\"Filled_Area\",\n\t\t\"Footprint\",\n\t\t\"Graphic\",\n\t\t\"Hole\",\n\t\t\"Keepin\",\n\t\t\"Keepout\",\n\t\t\"Leader\",\n\t\t\"Pad\",\n\t\t\"Physical_Layer\",\n\t\t\"Polycurve_Area\",\n\t\t\"Polygon\",\n\t\t\"Polyline\",\n\t\t\"Text\",\n\t\t\"Trace\"\n\t\t],\n\t\t\n\t\"Board_Assy\"\n\t\t:[\n\t\t\"Board_Assembly\",\n\t\t\"Board_Part_Instance\",\n\t\t\"Electrical_Part_Instance\",\n\t\t\"Mechanical_Part_Instance\",\n\t\t\"Sublayout\"\n\t\t],\n\t\t\n\t\"Default_Units\":\"" + GetBoardUnits() + "\",\n\t\"Min_Res\":\"0\",\n\t\"Notes\":\"\"\n\t}\n";			   

}  //end sub

string SetUsedFlag(string pt) {
     string fields[];
     int fieldCount = strsplit(fields, pt, '\t');

     return fields[0] + "\t" + fields[1] + "\t" + fields[2] + "\t" + fields[3]
               + "\ty\n";
}

int IsUsedPoint(string pt) {
     string fields[];
     int fieldCount = strsplit(fields, pt, '\t');

     if (fields[4] == "n\n")
          return 0;
     else
          return 1;
}

string IsUsedPointDebug(string pt) {
     string fields[];
     int fieldCount = strsplit(fields, pt, '\t');

     return fields[4];

}

string FlipPoints(string line) {
     string fields[];

     int fieldCount = strsplit(fields, line, '\t');

     return fields[2] + "\t" + fields[3] + "\t" + fields[0] + "\t" + fields[1]
               + "\t" + fields[4];
}

string GetFieldFromPtString(string ptString, int index) {
     string fields[];

     // "pt 1\ttype\tx1\ty1\tx2\ty2\tsorted_flag"
     int fieldCount = strsplit(fields, ptString, '\t');

     if (fieldCount >= index) {
          return fields[index];
     } else {
          return "";
     }  //end if-else

}  //end sub

real GetX1FromPtString(string ptString) {
     return strtod(GetFieldFromPtString(ptString, 0));
} //end sub

real GetY1FromPtString(string ptString) {
     return strtod(GetFieldFromPtString(ptString, 1));
} //end sub

real GetX2FromPtString(string ptString) {
     return strtod(GetFieldFromPtString(ptString, 2));
} //end sub

real GetY2FromPtString(string ptString) {
     return strtod(GetFieldFromPtString(ptString, 3));
} //end sub

real GetWidthFromPtString(string ptString) {
     return strtod(GetFieldFromPtString(ptString, 4));
} //end sub
int LayerNumInUse(int layerNum) {
     //returns true=1 if layer Is being used. returns 0 if layer Is not used.
     int layerUsed = 0;

     board(B)
     {
          B.layers(L)
          {
               if (L.number == layerNum) {
                    layerUsed = 1;
               }  //end if
          }  //layers loop
     }  //board loop

     return layerUsed;
}

int LayerIsIDFDebug(int layerNum) {
     board(B)
     {
          B.layers(L)
          {
               if (L.number == layerNum && L.name == "IDFDebug") {
                    return 1;
               }  //end if
          }  //layers loop
     }  //board loop

     return 0;
}

string GetIDFDebugLayerAvailNum() {

     //loop thru layers and check for name IDFDebug
     int startSearchNumber = 100;
     int layerAvail = -1;

     for (int i = startSearchNumber; i < 256; ++i) {

          //if layer Is not in use then use it. also have to check if layer Is in use but Is already idf debug
          if (!LayerNumInUse(i)) {
               layerAvail = i;
               break;
          } else {
               //check to make sure layer Is not already idf debug
               if (LayerIsIDFDebug(i)) {
                    layerAvail = i;
                    break;
               }  //end if
          }  //end if-else
     }  //end for

     string temp;

     sprintf(temp, "%d", layerAvail);

     return temp;

}  //end func

string GetIDFDebugLayerNum() {

     //loop thru layers and check for name IDFDebug
     int IDFDebugLayerNum = -1;

     board(B)
     {
          B.layers(L)
          {
               if (L.name == "IDFDebug") {
                    IDFDebugLayerNum = L.number;
               }  //end if
          }  //layers loop
     }  //board loop

     string temp;

     sprintf(temp, "%d", IDFDebugLayerNum);

     return temp;

}  //end func

string RemoveIDFDebugLayerCommands() {

     //check if present
     string debugLayerNum = GetIDFDebugLayerNum();

     //if debugLayerNum Is -1 then it doesnt exist so no delete needed.
     if (debugLayerNum == "-1") {
          return "";
     } else {
          string commands;

          //commands
          //show only IDFDebugLayer
          commands += "DISPLAY -20 " + debugLayerNum + ";";

          //run group all command to select all circles
          //commands += "GROUP ALL;";

          //delete circles
          //DELETE (x y) where x y are points on circle outline
          board(B)
          {
               B.circles(C)
               {
                    if (C.layer == strtol(debugLayerNum)) {

                         commands += "DELETE ( " + rtos(GetDimInBoardUnits(C.x))
                                   + " " + rtos(GetDimInBoardUnits(C.y)) + " );";

                    }  //end if
               }  //end wire loop

               B.wires(W)
               {
                    if (W.layer == strtol(debugLayerNum)) {

                         commands += "DELETE ( " + rtos(GetDimInBoardUnits(W.x1))
                                   + " " + rtos(GetDimInBoardUnits(W.y1)) + " );";

                    }  //end if
               }  //end wire loop

          }  //board loop

          //delete layer now
          commands += "LAYER ?? -" + debugLayerNum + ";";

          return commands;
     }  //end if/else
}  //end fund



string TraceSide(int side)
{
	if(side==LAYER_TOP || side==LAYER_TSTOP)
		return "Conductor_Top";
	else if(side==LAYER_BOTTOM || side==LAYER_BSTOP)
		return "Conductor_Bottom";
	return "";
}

string SilkScreenSide(int side)
{
	if(side==LAYER_TPLACE || side==LAYER_TNAMES || side==LAYER_TDOCU || side==LAYER_TVALUES)
		return "Silkscreen_Top";
	else if(side==LAYER_BPLACE || side==LAYER_BNAMES || side==LAYER_BDOCU || side==LAYER_BVALUES)
		return "Silkscreen_Bottom";
	else if(side==LAYER_TOP || side==LAYER_TSTOP)
		return "Conductor_Top";
	else if(side==LAYER_BOTTOM || side==LAYER_BSTOP)
		return "Conductor_Bottom";		
	return "";
}
string write_wire(UL_WIRE W, UL_SIGNAL S)
{
	string tracestring="";
	string side="";
	int prevSideLength=0;
	int currSideLength=0;
	real prevWidth=0;
	real currWidth=0;
	real prevX2=0;
	real prevY2=0;
	int continution=0;
	W.pieces(P)
	{
		side=TraceSide(P.layer);
		if(strlen(side)>1)
		{
			currSideLength=strlen(side);
			currWidth=GetDimInBoardUnits(P.width);		
			if (P.arc)
			{
				char longpath;
				if( abs(P.arc.angle2-P.arc.angle1) < 180.0 )
					longpath='0';
				else
					longpath='1';
				//svgWriteArc(P.arc.x1, P.arc.y1, P.arc.x2, P.arc.y2, P.arc.radius, longpath, P.layer, style);   
			}
			else		//straight lines
			{
				dlgMessageBox("("+itos(currSideLength)+" == "+itos(prevSideLength)+") && ("+rtos(currWidth)+"=="+rtos(prevWidth)+") && ("+rtos(GetDimInBoardUnits(P.x1))+"=="+rtos(prevX2)+") && ("+rtos(GetDimInBoardUnits(P.y1))+"=="+rtos(prevY2)+")");
				if((currSideLength == prevSideLength) && (currWidth==prevWidth) && (GetDimInBoardUnits(P.x1)==prevX2) && (GetDimInBoardUnits(P.y1)==prevY2))	//continuation of the same trace
				{
					tracestring+= "\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2));
					continution=1;
				}
				if(continution==0)
				{
					tracestring+="\n\nstart \n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) ;
				}
				
				prevWidth = currWidth;
				prevSideLength = currSideLength;
				prevX2 = GetDimInBoardUnits(P.x2);
				prevY2 = GetDimInBoardUnits(P.y2);
				continution=0;
			}     
		}   
	}    
	return tracestring;
}
string arcToLines(real C_angle1,real C_angle2,real C_radius,real C_x1,real C_y1,real C_xc,real C_yc,int xy,int repeat_first_n, int skip_first)
{
	real deg2rad = 0.0174532925; //used to convert degress to radians for arc parsing
	string outlinePoints[]; //holds points extracted from board
	string outlinePointsSorted[];  //holds points after they are sorted
	real bx1 = 0.0, by1 = 0.0, bx2 = 0.0, by2 = 0.0; //line start and end points
	//used for drawing arc lines
	real incx = 0.0, incy = 0.0;  //store incremental x/y values for arc
	real currentAngle = 0.0, incrementAngle = 15;
	int wireCount = 0;
	string temp;							
	bx1 = C_x1;
	by1 = C_y1;
	string ret="";
	
	 //for arc Get data to generate points
	 real angle1 = C_angle1, angle2 = C_angle2, centerx =  C_xc, centery =   C_yc;
	 real endx = bx2, endy = by2; //store arc end points to close arc.
	 //reset current angle value
	 currentAngle = incrementAngle;
	 //determine which direction to draw arc by Getting x/y points based on angle1
	 incx = (cos(deg2rad * (angle1))
			   * C_radius) + centerx;
	 incy = (sin(deg2rad * (angle1))
			   * C_radius) + centery;
	 //check if arc start points match calculated start points using angle1. if they do then its a counter clockwise drawn arc
	 if (CompareReals(incx, bx1) && CompareReals(incy, by1)) {
		  ///loop thru 5 deg increments
		  //arc defined counter clockwise so you need to subtract the increment
		  while ((angle1 + currentAngle) < angle2) {
			   incx = (cos(deg2rad * (angle1 + currentAngle))
						 * C_radius)
						 + centerx;
			   incy = (sin(deg2rad * (angle1 + currentAngle))
						 * C_radius)
						 + centery;
			   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx, incy);
			   outlinePoints[wireCount] = temp;
			   currentAngle += incrementAngle;
			   wireCount++;
			   //update beginning x/y values
			   bx1 = incx;
			   by1 = incy;
		  }  //end while
	 } else {
		  ///loop thru 5 deg increments
		  //arc defined counter clockwise so you need to subtract the increment
		  while ((angle2 - currentAngle) > angle1) {
			   incx = (cos(deg2rad * (angle2 - currentAngle))
						 * C_radius)
						 + centerx;
			   incy = (sin(deg2rad * (angle2 - currentAngle))
						 * C_radius)
						 + centery;
			   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx,
						 incy);
			   outlinePoints[wireCount] = temp;
			   currentAngle += incrementAngle;
			   wireCount++;
			   //update beginning x/y values
			   bx1 = incx;
			   by1 = incy;
		  }  //end while
	 }  //end if/else for check on direction of arc
	 //close arc
	 sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, endx, endy);
	 outlinePoints[wireCount] = temp;
	 wireCount++;	
	 for (int i = skip_first; i < wireCount; i++)
	 {
		if(xy==1)
			ret+="\t\t\t\t\t\t\t\t[" + rtos(GetX1FromPtString(outlinePoints[i]))+","+rtos(GetY1FromPtString(outlinePoints[i]))+"],\n";
		else
			ret+="\t\t\t\t\t\t\t\t[" + rtos(GetX1FromPtString(outlinePoints[i]))+","+rtos(GetY1FromPtString(outlinePoints[i]))+",0],\n";
	 }
	 for(i=skip_first;i<repeat_first_n;i++)
	 {
		if(i<repeat_first_n-1)
			ret+="\t\t\t\t\t\t\t\t[" + rtos(GetX1FromPtString(outlinePoints[i]))+","+rtos(GetY1FromPtString(outlinePoints[i]))+"],\n";
		else
			ret+="\t\t\t\t\t\t\t\t[" + rtos(GetX1FromPtString(outlinePoints[i]))+","+rtos(GetY1FromPtString(outlinePoints[i]))+"]\n";
	 }
	 return ret;
}

real distanceBetweenPoints(real x1, real y1, real x2, real y2)
{
	return sqrt((x2-x1)*(x2-x1)+(y2-y1)*(y2-y1));
}

string roundedRectToLineSegs(real w,real h,real rx)
{
	string ret="";//rtos(w) +","+ rtos(h) +","+ rtos(rx);
	real dist=0;
	dist=distanceBetweenPoints(-w/2,rx-(h/2),-w/2,(h/2)-rx);
	if(dist>0.05)
		ret="\t\t\t\t\t\t\t\t[" + rtos(-w/2)+","+rtos(rx-(h/2))+",0],\n"+
			"\t\t\t\t\t\t\t\t[" + rtos(-w/2)+","+rtos((h/2)-rx)+",0],\n";	//first two points	
	else
		ret="\t\t\t\t\t\t\t\t[" + rtos(-w/2)+","+rtos(rx-(h/2))+",0],\n";
	real C_angle1 = 90;
	real C_angle2 = 180;
	real C_x1 = -w/2;
	real C_y1 = (h/2)-rx;
	real C_xc = rx-(w/2);
	real C_yc = (h/2)-rx;
	ret+= arcToLines( C_angle1, C_angle2, rx, C_x1, C_y1, C_xc, C_yc,0,0,1);
	dist=distanceBetweenPoints(rx-(w/2),h/2,(w/2)-rx,h/2);
	if(dist>0.05)
		ret+="\t\t\t\t\t\t\t\t[" + rtos(rx-(w/2))+","+rtos(h/2)+",0],\n" +
			"\t\t\t\t\t\t\t\t[" + rtos((w/2)-rx)+","+rtos(h/2)+",0],\n";		//next two points
	else
		ret+="\t\t\t\t\t\t\t\t[" + rtos(rx-(w/2))+","+rtos(h/2)+",0],\n";
	C_angle1 = 0;
	C_angle2 = 90;
	C_x1 = (w/2)-rx;
	C_y1 = h/2;
	C_xc = (w/2)-rx;
	C_yc = (h/2)-rx;
	ret+= arcToLines( C_angle1, C_angle2, rx, C_x1, C_y1, C_xc, C_yc,0,0,1);
	dist=distanceBetweenPoints(w/2,(h/2)-rx,w/2,rx-(h/2));
	if(dist>0.05)
		ret+="\t\t\t\t\t\t\t\t[" + rtos(w/2)+","+rtos((h/2)-rx)+",0],\n" + 
			"\t\t\t\t\t\t\t\t[" + rtos(w/2)+","+rtos(rx-(h/2))+",0],\n" ;		//next two points
	else
		ret+="\t\t\t\t\t\t\t\t[" + rtos(w/2)+","+rtos((h/2)-rx)+",0],\n" ;
	C_angle1 = 270;
	C_angle2 = 360;
	C_x1 = (w/2);
	C_y1 = rx-(h/2);
	C_xc = (w/2)-rx;
	C_yc = rx-(h/2);
	ret+= arcToLines( C_angle1, C_angle2, rx, C_x1, C_y1, C_xc, C_yc,0,0,1);		
	dist=distanceBetweenPoints((w/2)-rx,-h/2,rx-(w/2),-h/2);
	if(dist>0.05)
		ret+="\t\t\t\t\t\t\t\t[" + rtos((w/2)-rx)+","+rtos(-h/2)+",0],\n"+
			"\t\t\t\t\t\t\t\t[" + rtos(rx-(w/2))+","+rtos(-h/2)+",0],\n";	//next two points
	else
		ret+="\t\t\t\t\t\t\t\t[" + rtos((w/2)-rx)+","+rtos(-h/2)+",0],\n";
	C_angle1 = 180;
	C_angle2 = 270;
	C_x1 = rx-(w/2);
	C_y1 = -h/2;
	C_xc = rx-(w/2);
	C_yc = rx-(h/2);
	ret+= arcToLines( C_angle1, C_angle2, rx, C_x1, C_y1, C_xc, C_yc,0,0,1);			
	ret+="\t\t\t\t\t\t\t\t[" + rtos(-w/2)+","+rtos(rx-(h/2))+",0]";
	return ret;
	
}
string deblank(string in)
{
    string ret="";
	ret = in;
    int i=0;
	int j=0;
	int len = strlen(in);
    for (i = 0; i<len; i++)          
    {
        if (in[i]!=' ' && in[i]!='\t')    
		{
            ret[j]=in[i];
			j++;
		}                          
    }
    ret[j]=0;	
    return ret; 
}
string rotateTranslatePad(string data, real angle,real tx, real ty,int xy_only)
{
	//return data;
	string ret="";
	real deg2rad = 0.0174532925; //used to convert degress to radians for rotating
	int startpos= 0;
	int skipAhead=0;
	if(xy_only==1)
	{
		startpos=strstr(data,"XY_Pts");
		skipAhead = 6;
	}
	else
	{
		startpos=strstr(data,"Vertices");
		skipAhead = 8;
	}
	string leftstring="";
	angle=360-angle;
	real cosine = cos(deg2rad*angle);
	real sine = sin(deg2rad*angle);
	string zeropad="";
	if(xy_only==1)
		zeropad="";
	else
		zeropad=",0";
	if(startpos>=0)		//Found the vertices then proceed to rotation
	{
		leftstring=strsub(data,0,startpos+skipAhead);
		string strtemp=strsub(data,startpos+skipAhead);
		startpos = strstr(strtemp,"}");
		strtemp = strsub(strtemp,1,startpos-2);
		startpos = strstr(strtemp,"[");
		if(startpos>=0)
			strtemp = strsub(strtemp,startpos+1);
		string split[];
		int pieces = strsplit(split,deblank(strtemp),'\n');
		//data+=deblank(strtemp);
		for(int i=0;i<pieces;i++)
		{
			split[i]=deblank(split[i]);
			
			if(strlen(split[i])>2)
			{
				if(xy_only==1)
					split[i] = strsub(split[i],1,strlen(split[i])-3);
				else
					split[i] = strsub(split[i],1,strlen(split[i])-2);
				//data+=split[i]+"\n";
				string xy[];
				strsplit(xy,split[i],',');
				//if(i==pieces-1)
				//	ret+="\t\t\t\t\t\t\t\t"+rtos((strtod(xy[0])+tx)*cosine+(strtod(xy[1])+ty)*sine)+","+rtos((strtod(xy[1])+ty)*cosine-(strtod(xy[0])+tx)*sine)+zeropad+"\n\t\t\t\t\t\t\t)";
				//else
				ret+="\n\t\t\t\t\t\t\t\t["+rtos((strtod(xy[0])+tx)*cosine+(strtod(xy[1])+ty)*sine)+","+rtos((strtod(xy[1])+ty)*cosine-(strtod(xy[0])+tx)*sine)+zeropad+"],";
			}
		}
		ret[strlen(ret)-1]='\0';
		if(xy_only==1)
			return leftstring+"\":\n\t\t\t\t\t\t\t["+ret+"\n\t\t\t\t\t\t\t]\n\t\t\t\t\t}}\n\t\t\t\t},\n";
			//return data;
		else
			return leftstring+"\":\n\t\t\t\t\t\t\t["+ret+"\n\t\t\t\t\t\t\t]\n\t\t\t\t\t}}\n\t\t\t\t},\n";
		
	}
	else
		return data;
}
string writeSMDPad(int w, int h, int roundness)
{
	string rect = "";

	if (w<h)
		{ roundness = w*roundness/200; }
	else
		{ roundness = h*roundness/200; }

	if(roundness==0)
	{
		sprintf(rect,"\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0]",GetDimInBoardUnits(-w/2), GetDimInBoardUnits(-h/2),GetDimInBoardUnits(w/2), GetDimInBoardUnits(-h/2),GetDimInBoardUnits(w/2), GetDimInBoardUnits(h/2),GetDimInBoardUnits(-w/2), GetDimInBoardUnits(h/2),GetDimInBoardUnits(-w/2), GetDimInBoardUnits(-h/2));
	}
	else
	{
		//sprintf(rect, "<rect x='%f' y='%f' width='%f' height='%f' rx='%f'/>\n",	GetDimInBoardUnits(x-w/2), GetDimInBoardUnits(y-h/2), GetDimInBoardUnits(w), GetDimInBoardUnits(h), GetDimInBoardUnits(roundness));
		rect = roundedRectToLineSegs(GetDimInBoardUnits(w),GetDimInBoardUnits(h),GetDimInBoardUnits(roundness));
		
	}
	return rect;
}

string WriteThPads(int diameter,int elongation, int shape)
{
	string rect = "";
	if(shape==PAD_SHAPE_SQUARE)
	{
		sprintf(rect,"\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#%s\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0]\n\t\t\t\t\t\t\t]",GenerateID(),GetDimInBoardUnits(-diameter/2), GetDimInBoardUnits(-diameter/2),GetDimInBoardUnits(diameter/2), GetDimInBoardUnits(-diameter/2),GetDimInBoardUnits(diameter/2), GetDimInBoardUnits(diameter/2),GetDimInBoardUnits(-diameter/2), GetDimInBoardUnits(diameter/2),GetDimInBoardUnits(-diameter/2), GetDimInBoardUnits(-diameter/2));	
	}	
	else if(shape==PAD_SHAPE_ROUND)
	{
		sprintf(rect,"\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#%s\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0.0, 0.0],\n\t\t\t\t\t\t\"Radius\":\"%f\"",GenerateID(),GetDimInBoardUnits(diameter/2));
	}
	else if(shape==PAD_SHAPE_OCTAGON)
	{
		real x1 = GetDimInBoardUnits(diameter)/2; 
		real y1 = GetDimInBoardUnits(diameter)/2; 
		real x2 = GetDimInBoardUnits(diameter)/(2*(1+1.414213562));
		real y2 = GetDimInBoardUnits(diameter)/(2*(1+1.414213562)); 	
		sprintf(rect,"\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#%s\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0],\n\t\t\t\t\t\t\t\t[%f,%f,0]\n\t\t\t\t\t\t\t]",GenerateID(),-x1, -y2, -x2, -y1, x2, -y1, x1, -y2, x1, y2, x2, y1, -x2, y1, -x1, y2, -x1, -y2);		
	}
	else if(shape==PAD_SHAPE_LONG || shape==PAD_SHAPE_OFFSET)
	{
		rect="\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n";
		real roundness = (diameter*elongation)/200;
		rect+=roundedRectToLineSegs(GetDimInBoardUnits(diameter+((diameter*elongation)/100)),GetDimInBoardUnits(diameter),GetDimInBoardUnits(roundness));
		rect+="\n\t\t\t\t\t\t\t]";
	}
	//else
	//{
	//	sprintf(rect,"\n\t\t\t\t\tCircle\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#%s),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tXY_Loc (0.0, 0.0),\n\t\t\t\t\t\tRadius (%f)",GenerateID(),GetDimInBoardUnits(diameter/2));
	//}
	return rect;
}
int effectiveangle(real angle,int shape)
{
	if(shape==PAD_SHAPE_SQUARE)
	{
		if(angle==90 || angle==270 || angle==360)
			return 0;
	}
	else if(shape==PAD_SHAPE_OCTAGON)
	{
		if(angle==45 || angle==90 || angle==135 || angle==180 || angle==225 || angle==270 || angle==315 || angle==360)
			return 0;
	}
	else if(shape==PAD_SHAPE_ROUND)
	{
		return 0;
	}
	else if(shape==PAD_SHAPE_LONG)
	{
		if(angle==180 || angle==360)
			return 0;
		else if(angle==270)
			return 90;
	}
	return angle;
}
string GetPads()
{
	string padString="";
	string sideMap[] = { "Conductor_Top", "Conductor_Bottom" };
	string temp="";
	real effAngle = 0;
	real diameter=0;
	board(B) 
	{
		B.elements(E)
		{
			string side = sideMap[E.mirror];
			UL_PACKAGE PAC = E.package;
			PAC.contacts(C)
			{
				string netName = GenerateID();
				if(strlen(C.signal)>1)
					netName = C.signal;
				//padString += C.signal +",\n";
				if(C.smd)
				{
					if(C.smd.layer==LAYER_TOP)
					{
						if(C.smd.dx[LAYER_TSTOP]>0 || C.smd.dy[LAYER_TSTOP]>0)
						{
							temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"stop\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.smd.x)) + " , " + rtos(GetDimInBoardUnits(C.smd.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Vertices\"\n\t\t\t\t\t\t\t[\n"+ writeSMDPad(C.smd.dx[LAYER_TSTOP],C.smd.dy[LAYER_TSTOP],C.smd.roundness) + "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}n\t\t\t\t\t}\n\t\t\t\t},\n";
							padString += rotateTranslatePad(temp,C.smd.angle,0,0,0) ;
						}
						if(C.smd.dx[LAYER_TOP]>0 || C.smd.dy[LAYER_TOP]>0)
						{
							temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.smd.x)) + " , " + rtos(GetDimInBoardUnits(C.smd.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Vertices\"\n\t\t\t\t\t\t\t[\n"+ writeSMDPad(C.smd.dx[LAYER_TOP],C.smd.dy[LAYER_TOP],C.smd.roundness) + "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}n\t\t\t\t\t}\n\t\t\t\t},\n";
							padString += rotateTranslatePad(temp,C.smd.angle,0,0,0) ;
						}						
					}
					if(C.smd.layer==LAYER_BOTTOM)
					{
						if(C.smd.dx[LAYER_BSTOP]>0 || C.smd.dy[LAYER_BSTOP]>0)
						{
							temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"stop\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.smd.x)) + " , " + rtos(GetDimInBoardUnits(C.smd.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Vertices\"\n\t\t\t\t\t\t\t[\n"+ writeSMDPad(C.smd.dx[LAYER_BSTOP],C.smd.dy[LAYER_BSTOP],C.smd.roundness) + "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}n\t\t\t\t\t}\n\t\t\t\t},\n";		
							padString += rotateTranslatePad(temp,C.smd.angle,0,0,0) ;
						}
						if(C.smd.dx[LAYER_BOTTOM]>0 || C.smd.dy[LAYER_BOTTOM]>0)
						{
							temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.smd.x)) + " , " + rtos(GetDimInBoardUnits(C.smd.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Vertices\"\n\t\t\t\t\t\t\t[\n"+ writeSMDPad(C.smd.dx[LAYER_BOTTOM],C.smd.dy[LAYER_BOTTOM],C.smd.roundness) + "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}n\t\t\t\t\t}\n\t\t\t\t},\n";		
							padString += rotateTranslatePad(temp,C.smd.angle,0,0,0) ;
						}						
					}
					//padString += rotateTranslatePad(temp,C.smd.angle,0,0,0) ;//+ "//actual angle for the above was " + rtos(C.smd.angle) + "\n";
				}
				else 
				if(C.pad)
				{
					real tx=0;
					real ty=0;
					if(C.pad.shape[LAYER_PADS] == PAD_SHAPE_OFFSET)
						tx = GetDimInBoardUnits(C.pad.drill/2);
					if(C.pad.diameter[LAYER_TOP] >0)
					{
						diameter = C.pad.diameter[LAYER_TOP];
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+sideMap[0]+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.pad.x)) + " , " + rtos(GetDimInBoardUnits(C.pad.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,C.pad.elongation,C.pad.shape[LAYER_PADS]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
						effAngle = effectiveangle(C.pad.angle,C.pad.shape[LAYER_PADS]);
						if(effAngle!=0)
							padString += rotateTranslatePad(temp,effAngle,tx,ty,0);
						else
							padString += temp;
					}
					if(C.pad.diameter[LAYER_BOTTOM] >0)
					{
						diameter = C.pad.diameter[LAYER_BOTTOM];				
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+sideMap[1]+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.pad.x)) + " , " + rtos(GetDimInBoardUnits(C.pad.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,C.pad.elongation,C.pad.shape[LAYER_PADS]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
						effAngle = effectiveangle(C.pad.angle,C.pad.shape[LAYER_PADS]);
						if(effAngle!=0)
							padString += rotateTranslatePad(temp,effAngle,tx,ty,0);
						else
							padString += temp;
					}	
					if(C.pad.diameter[LAYER_TSTOP] >0)
					{
						diameter = C.pad.diameter[LAYER_TSTOP];
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"stop\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+sideMap[0]+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.pad.x)) + " , " + rtos(GetDimInBoardUnits(C.pad.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,C.pad.elongation,C.pad.shape[LAYER_PADS]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
						effAngle = effectiveangle(C.pad.angle,C.pad.shape[LAYER_PADS]);
						if(effAngle!=0)
							padString += rotateTranslatePad(temp,effAngle,tx,ty,0);
						else
							padString += temp;
					}
					if(C.pad.diameter[LAYER_BSTOP] >0)
					{
						diameter = C.pad.diameter[LAYER_BSTOP];					
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"stop\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+sideMap[1]+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(C.pad.x)) + " , " + rtos(GetDimInBoardUnits(C.pad.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,C.pad.elongation,C.pad.shape[LAYER_PADS]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
						effAngle = effectiveangle(C.pad.angle,C.pad.shape[LAYER_PADS]);
						if(effAngle!=0)
							padString += rotateTranslatePad(temp,effAngle,tx,ty,0);
						else
							padString += temp;
					}				
				}
			}
			PAC.circles(C)
			{	
				if(C.layer==LAYER_TSTOP || C.layer==LAYER_BSTOP || C.layer==LAYER_TOP)
				{
					string pad_type="";
					if(C.layer==LAYER_TSTOP)
						pad_type="stop";
					if(C.layer==LAYER_TSTOP)
						pad_type="stop";
					if(C.layer==LAYER_TSTOP)
						pad_type="pad";
					if(C.width<C.radius*2)
					{
						padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+pad_type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+TraceSide(C.layer)+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\": \"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":\""+rtos(GetDimInBoardUnits(C.width))+"\",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
						temp = arcToLines(0,360,GetDimInBoardUnits(C.radius),GetDimInBoardUnits(C.x+C.radius),GetDimInBoardUnits(C.y),GetDimInBoardUnits(C.x),GetDimInBoardUnits(C.y),1,2,0);
						//temp[strlen(temp)-2] = '\0';
						padString+= temp;
						padString+="\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
					}
					else
					{
						padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+TraceSide(C.layer)+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"XY_Loc\":["+rtos(GetDimInBoardUnits(C.x))+","+rtos(GetDimInBoardUnits(C.y))+"],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0.0, 0.0],\n\t\t\t\t\t\t\"Radius\":"+rtos(GetDimInBoardUnits((C.width/2)+C.radius))+"\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
					}
				}
				//else
				//	ret+= "//----------------------------"+itos(C.layer)+"--------------------------------------//\n";
				
			}
			PAC.rectangles(R)
			{
				if(R.layer==LAYER_TSTOP || R.layer==LAYER_BSTOP || R.layer==LAYER_BOTTOM || R.layer==LAYER_TOP)
				{
					string pad_type="";
					if(R.layer==LAYER_TSTOP)
						pad_type="stop";
					if(R.layer==LAYER_BSTOP)
						pad_type="stop";
					if(R.layer==LAYER_BOTTOM)
						pad_type="pad";			
					if(R.layer==LAYER_TOP)
						pad_type="pad";			
					real cx = (R.x1+R.x2)/2;
					real cy = (R.y1+R.y2)/2;
					real w = abs(R.x1-R.x2);
					real h = abs(R.y1-R.y2);
					temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+pad_type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\""+TraceSide(R.layer)+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint \":\"False\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"XY_Loc\":["+rtos(GetDimInBoardUnits(cx))+" , "+rtos(GetDimInBoardUnits(cy))+"],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[";
					temp+= 	"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0],"+
							"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(h/2))+ ",0],"+
							"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(w/2)) + "," + rtos(GetDimInBoardUnits(h/2))+ ",0],"+
							"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0],"+
							"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0]";
					temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";	
					effAngle = effectiveangle(R.angle,PAD_SHAPE_LONG);
					if(effAngle!=0)
						padString += rotateTranslatePad(temp,effAngle,0,0,0);
					else
						padString += temp;
				}
				//else
				//	ret+= "//----------------------------"+itos(R.layer)+"--------------------------------------//\n";
			}			
		}
	}
	return padString;
}
string isPartOfPolygon(string polygon, string line1)
{
	real l1bx1 = 0.0, l1by1 = 0.0, l1bx2 = 0.0, l1by2 = 0.0, l1Width = 0.0; //line start and end points
	int i=0;
	l1bx1=GetX1FromPtString(line1);
	l1by1=GetY1FromPtString(line1);
	l1bx2=GetX2FromPtString(line1);
	l1by2=GetY2FromPtString(line1);	
	l1Width = GetWidthFromPtString(line1);
	string pieces[];
	int n = strsplit(pieces, polygon, '\n');
	i=n-1;
	//for (i=0;i<n;i++)
	{
		string xy[];
		strsplit(xy, pieces[i], ',');
		if(abs(strtod(xy[2])-l1Width)<=0.005)
		{
			if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),l1bx1,l1by1)<=0.05)
				return rtos(l1bx2)+","+rtos(l1by2)+","+rtos(l1Width);
			else if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),l1bx2,l1by2)<=0.05)
				return rtos(l1bx1)+","+rtos(l1by1)+","+rtos(l1Width);
		}
	}
	//i=0;
	//{
	//	string xy[];
	//	strsplit(xy, pieces[i], ',');
	//	if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),l1bx1,l1by1)<=0.0125)
	//		return rtos(l1bx2)+","+rtos(l1by2)+"F";
	//	else if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),l1bx2,l1by2)<=0.0125)
	//		return rtos(l1bx1)+","+rtos(l1by1)+"F";
	//}	
	return "";
}
string sortline(string line1)
{
	real l1bx1 = 0.0, l1by1 = 0.0, l1bx2 = 0.0, l1by2 = 0.0, l1Width = 0.0; //line start and end points
	l1bx1=GetX1FromPtString(line1);
	l1by1=GetY1FromPtString(line1);
	l1bx2=GetX2FromPtString(line1);
	l1by2=GetY2FromPtString(line1);	
	l1Width = GetWidthFromPtString(line1);
	
	if(l1bx1>l1bx2)
		return FlipPoints(line1);
	else if(l1bx1==l1bx2)
	{
		if(l1by1>l1by2)
			return FlipPoints(line1);
	}
	return line1;
}
string getCommonBetweenLines(string line1,string line2)
{
	real l1bx1 = 0.0, l1by1 = 0.0, l1bx2 = 0.0, l1by2 = 0.0; //line start and end points
	real l2bx1 = 0.0, l2by1 = 0.0, l2bx2 = 0.0, l2by2 = 0.0; //line start and end points
	l1bx1=GetX1FromPtString(line1);
	l1by1=GetY1FromPtString(line1);
	l1bx2=GetX2FromPtString(line1);
	l1by2=GetY2FromPtString(line1);
	l2bx1=GetX1FromPtString(line2);
	l2by1=GetY1FromPtString(line2);
	l2bx2=GetX2FromPtString(line2);
	l2by2=GetY2FromPtString(line2);	
	string ret="";
	/*
	Following combinations exist
	
	>---> >--->	(End of first is start of second)
	>---> <---< (End of first is end of second)
	<---< >---> (Start of first is start of second)
	<---< <---< (Start of first is end of second)
	
	*/
	ret = "newline";
	if((distanceBetweenPoints(l1bx2,l1by2,l2bx1,l2by1)<=0.025) || (distanceBetweenPoints(l1bx2,l1by2,l2bx2,l2by2)<=0.025))
		ret =  rtos(l1bx2)+","+rtos(l1by2);

	if((distanceBetweenPoints(l1bx1,l1by1,l2bx1,l2by1)<=0.025) || (distanceBetweenPoints(l1bx1,l1by1,l2bx2,l2by2)<=0.025))
		ret = rtos(l1bx1)+","+rtos(l1by1);
	
	//dlgMessageBox(line1+" AND " +line2 + " Common = " + ret);
	return ret;
}


string sortTraces(string traceSegments,string netName,string side) 
{

     //init vars
     //string logFilePath = filesetext(GetBoardPath(), "_trace.log");
    
	 
     string tracestring = "";
     int wireCount = 0;

     string outlinePointsTemp[]; //holds points extracted from board
     string outlinePoints[];  //holds points after they are sorted

     real deg2rad = 0.0174532925; //used to convert degress to radians for arc parsing

     real bx1 = 0.0, by1 = 0.0, bx2 = 0.0, by2 = 0.0; //line start and end points
     real startX = 0.0, startY = 0.0;
     int outlineNum = 0;

     //used for drawing arc lines
     real incx = 0.0, incy = 0.0;  //store incremental x/y values for arc
     real currentAngle = 0.0, incrementAngle = 10;

     string temp;  //temp string used with sprintf

	int i=0,j=0,k=0;


    int matchFound = 0;
	wireCount=strsplit(outlinePointsTemp, traceSegments , ',');
	for(i=0;i<wireCount;i++)
	{
		if(strlen(outlinePointsTemp[i])>5)
		{
			outlinePoints[j]=(outlinePointsTemp[i]);
			j++;
		}
	}
	wireCount = j;
	temp="";
	traceSegments="";
	for(i=0;i<wireCount;i++)
	{
		traceSegments+=sortline(outlinePoints[i]);
	}	
	//return traceSegments + "\n\n"+itos(wireCount);
  //end loop thru board
	j=0;
	int found=0;
	string pointsArray;
	int startIndex=-1;
	int startindices[];
	int startindicesCount=0;
	int startindicesIndex=0;
	//int i0=3;
	for(i=0;i<wireCount;i++)
	{
		real curX1 = GetX1FromPtString(outlinePoints[i]);
		real curY1 = GetY1FromPtString(outlinePoints[i]);
		real curX2 = GetX2FromPtString(outlinePoints[i]);
		real curY2 = GetY2FromPtString(outlinePoints[i]);	
		real curwidth = GetWidthFromPtString(outlinePoints[i]);	
		int foundx1y1=0;
		int foundx2y2=0;
		for(j=0;j<wireCount;j++)
		{
			real CompX1 = GetX1FromPtString(outlinePoints[j]);
			real CompY1 = GetY1FromPtString(outlinePoints[j]);
			real CompX2 = GetX2FromPtString(outlinePoints[j]);
			real CompY2 = GetY2FromPtString(outlinePoints[j]);		
			real compWidth = GetWidthFromPtString(outlinePoints[j]);		
			if(j!=i)
			{
				if(abs(compWidth-curwidth)<=0.005)
				{
					if(((distanceBetweenPoints(curX1,curY1,CompX1,CompY1)<=0.025) || (distanceBetweenPoints(curX1,curY1,CompX2,CompY2)<=0.025)) && foundx1y1==0)
					{
						foundx1y1 = 1;
					}
					if(((distanceBetweenPoints(curX2,curY2,CompX2,CompY2)<=0.025) ||(distanceBetweenPoints(curX2,curY2,CompX1,CompY1)<=0.025)) && foundx2y2==0)
					{
						foundx2y2 = 1;
					}
				}		
			}	
		}
		if(!(foundx1y1==1 && foundx2y2==1))
		{
			//startIndex=i;
			//break;
			startindices[startindicesCount] = i;
			startindicesCount++;
		}
	}

	//return traceSegments + "\n\n"+temp;
	for(startindicesIndex=0;startindicesIndex<startindicesCount;startindicesIndex++)
	{
		startIndex=startindices[startindicesIndex];
		if(startIndex>=0 && outlinePoints[startIndex]!="null")
		{
			//temp = outlinePoints[startIndex];
			//outlinePoints[startIndex] = outlinePoints[i0];
			//outlinePoints[i0] = temp;
			//found=0;
			real curX2 = GetX2FromPtString(outlinePoints[startIndex]);
			real curY2 = GetY2FromPtString(outlinePoints[startIndex]);		
			
			for(j=0;j<wireCount;j++)
			{
				if(j!=startIndex)
				{
					real CompX1 = GetX1FromPtString(outlinePoints[j]);
					real CompY1 = GetY1FromPtString(outlinePoints[j]);
					real CompX2 = GetX2FromPtString(outlinePoints[j]);
					real CompY2 = GetY2FromPtString(outlinePoints[j]);		
					if(((distanceBetweenPoints(curX2,curY2,CompX2,CompY2)<=0.025) ||(distanceBetweenPoints(curX2,curY2,CompX1,CompY1)<=0.025)))
					{
						found=1;
						break;
					}
				}
			}
			if(found==0)
			{
				
				//outlinePoints[i0] = FlipPoints(outlinePoints[i0]);
				//dlgMessageBox(outlinePoints[i0]);
				pointsArray = rtos(GetX2FromPtString(outlinePoints[startIndex]))+","+rtos(GetY2FromPtString(outlinePoints[startIndex]))+","+rtos(GetWidthFromPtString(outlinePoints[startIndex]))+"\n";
			}
			else
				pointsArray = rtos(GetX1FromPtString(outlinePoints[startIndex]))+","+rtos(GetY1FromPtString(outlinePoints[startIndex]))+","+rtos(GetWidthFromPtString(outlinePoints[startIndex]))+"\n";
			
			//return pointsArray;
			//traceSegments="";
			//for(i=i0;i<wireCount;i++)
			//{
			//	traceSegments += outlinePoints[i]+"\n";
			//}
			//return traceSegments;
			//string logtxt;
			//pointsArray += rtos(GetX1FromPtString(outlinePoints[i0]))+","+rtos(GetY1FromPtString(outlinePoints[i0]))+"\n";
			for(i=0;i<wireCount;i++)
			{
				found=0;
				for(k=0;k<wireCount;k++)
				{
					//logtxt+="pointsArray="+pointsArray+" outlinePoints["+itos(k)+"]= " + outlinePoints[k]+"\n\n";
					if(outlinePoints[k]!="null")
					{
						//dlgMessageBox("pointsArray="+pointsArray+" outlinePoints["+itos(k)+"]= " + outlinePoints[k]);
						string point = isPartOfPolygon(pointsArray,outlinePoints[k]);
						
						if(strlen(point)>1)
						{
							//logtxt+="-----------------\n"+point+"\n----------------------\n";
							outlinePoints[k]="null";
							pointsArray += point + "\n";
							found=1;
							//break;
						}
					}
					else
					{
						found=1;
					}
				}
				//if(found==0)
				//{
				//	//pointsArray += "newline\n";
				//	logtxt+="-----------------\n"+"New line"+"\n----------------------\n";
				//}
			}
			//WriteToFile(logFilePath,logtxt);
			
			real xVals[];
			real yVals[];
			string pieces[];
			string polywidth="";
			int pointscount = strsplit(pieces, pointsArray, '\n');
			string noduplicatePoints[];
			int noduplicatePointsCount=0;
			string xy[];
			for(i=0;i<pointscount;i++)
			{
				strsplit(xy, pieces[i], ',');		
				if(i==0)
				{
					noduplicatePoints[noduplicatePointsCount]=xy[0] + ","+ xy[1];
					//pointsArray = noduplicatePoints[noduplicatePointsCount] + "\n";	
					noduplicatePointsCount++;
					continue;
				}			
				found=0;
				j=0;
				for(j=0;j<noduplicatePointsCount;j++)
				{
					string compxy[];
					strsplit(compxy, noduplicatePoints[j], ',');	
					if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),strtod(compxy[0]),strtod(compxy[1]))<=0.025)
					{
						found=1;
						break;
					}
				}
				if(found==0)
				{
					noduplicatePoints[noduplicatePointsCount]=xy[0] + ","+ xy[1];
					//pointsArray += noduplicatePoints[noduplicatePointsCount] + "\n";
					noduplicatePointsCount++;
				}
			}
			polywidth = xy[2];
			tracestring+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":\""+polywidth+"\",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[";
			for(i=0;i<noduplicatePointsCount;i++)
			{
				if(i<noduplicatePointsCount-1)
					tracestring+="\n\t\t\t\t\t\t\t[" + noduplicatePoints[i]+"],";
				else
					tracestring+="\n\t\t\t\t\t\t\t[" + noduplicatePoints[i];
			}
			tracestring+= "]\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
			//tracestring+=">--------"+polywidth+"------>\n\n";
		}
		
	}
	j=0;
	found=0;
	startIndex=-1;
	startindices[0]='\0';
	startindicesCount=0;
	startindicesIndex=0;
	//int i0=3;
	for(i=0;i<wireCount;i++)
	{
		if(outlinePoints[i]!="null")
		{
			real curX1 = GetX1FromPtString(outlinePoints[i]);
			real curY1 = GetY1FromPtString(outlinePoints[i]);
			real curX2 = GetX2FromPtString(outlinePoints[i]);
			real curY2 = GetY2FromPtString(outlinePoints[i]);	
			real curwidth = GetWidthFromPtString(outlinePoints[i]);	
			int foundx1y1=0;
			int foundx2y2=0;
			for(j=0;j<wireCount;j++)
			{
				if(outlinePoints[j]!="null")
				{
					real CompX1 = GetX1FromPtString(outlinePoints[j]);
					real CompY1 = GetY1FromPtString(outlinePoints[j]);
					real CompX2 = GetX2FromPtString(outlinePoints[j]);
					real CompY2 = GetY2FromPtString(outlinePoints[j]);		
					real compWidth = GetWidthFromPtString(outlinePoints[j]);		
					if(j!=i)
					{
						if(abs(compWidth-curwidth)<=0.005)
						{
							if(((distanceBetweenPoints(curX1,curY1,CompX1,CompY1)<=0.025) || (distanceBetweenPoints(curX1,curY1,CompX2,CompY2)<=0.025)) && foundx1y1==0)
							{
								foundx1y1 = 1;
							}
							if(((distanceBetweenPoints(curX2,curY2,CompX2,CompY2)<=0.025) ||(distanceBetweenPoints(curX2,curY2,CompX1,CompY1)<=0.025)) && foundx2y2==0)
							{
								foundx2y2 = 1;
							}
						}		
					}
				}	
			}
			if(!(foundx1y1==1 && foundx2y2==1))
			{
				//startIndex=i;
				//break;
				startindices[startindicesCount] = i;
				startindicesCount++;
			}
		}
	}
	//temp="";
	//for(i=0;i<startindicesCount;i++)
	//{
	//	temp+=itos(startindices[i]) +",";
	//}
	//return traceSegments + "\n\n"+temp;
	for(startindicesIndex=0;startindicesIndex<startindicesCount;startindicesIndex++)
	{
		startIndex=startindices[startindicesIndex];
		if(startIndex>=0 && outlinePoints[startIndex]!="null")
		{
			//temp = outlinePoints[startIndex];
			//outlinePoints[startIndex] = outlinePoints[i0];
			//outlinePoints[i0] = temp;
			//found=0;
			real curX2 = GetX2FromPtString(outlinePoints[startIndex]);
			real curY2 = GetY2FromPtString(outlinePoints[startIndex]);		
			
			for(j=0;j<wireCount;j++)
			{
				if(j!=startIndex && outlinePoints[j]!="null")
				{
					real CompX1 = GetX1FromPtString(outlinePoints[j]);
					real CompY1 = GetY1FromPtString(outlinePoints[j]);
					real CompX2 = GetX2FromPtString(outlinePoints[j]);
					real CompY2 = GetY2FromPtString(outlinePoints[j]);		
					if(((distanceBetweenPoints(curX2,curY2,CompX2,CompY2)<=0.025) ||(distanceBetweenPoints(curX2,curY2,CompX1,CompY1)<=0.025)))
					{
						found=1;
						break;
					}
				}
			}
			if(found==0)
			{
				
				//outlinePoints[i0] = FlipPoints(outlinePoints[i0]);
				//dlgMessageBox(outlinePoints[i0]);
				pointsArray = rtos(GetX2FromPtString(outlinePoints[startIndex]))+","+rtos(GetY2FromPtString(outlinePoints[startIndex]))+","+rtos(GetWidthFromPtString(outlinePoints[startIndex]))+"\n";
			}
			else
				pointsArray = rtos(GetX1FromPtString(outlinePoints[startIndex]))+","+rtos(GetY1FromPtString(outlinePoints[startIndex]))+","+rtos(GetWidthFromPtString(outlinePoints[startIndex]))+"\n";
			
			for(i=0;i<wireCount;i++)
			{
				found=0;
				for(k=0;k<wireCount;k++)
				{
					//logtxt+="pointsArray="+pointsArray+" outlinePoints["+itos(k)+"]= " + outlinePoints[k]+"\n\n";
					if(outlinePoints[k]!="null")
					{
						//dlgMessageBox("pointsArray="+pointsArray+" outlinePoints["+itos(k)+"]= " + outlinePoints[k]);
						string point = isPartOfPolygon(pointsArray,outlinePoints[k]);
						
						if(strlen(point)>1)
						{
							//logtxt+="-----------------\n"+point+"\n----------------------\n";
							outlinePoints[k]="null";
							pointsArray += point + "\n";
							found=1;
							//break;
						}
					}
					else
					{
						found=1;
					}
				}
			}
			string pieces[];
			string polywidth="";
			int pointscount = strsplit(pieces, pointsArray, '\n');
			string noduplicatePoints[];
			int noduplicatePointsCount=0;
			string xy[];
			for(i=0;i<pointscount;i++)
			{
				strsplit(xy, pieces[i], ',');		
				if(i==0)
				{
					noduplicatePoints[noduplicatePointsCount]=xy[0] + ","+ xy[1];
					//pointsArray = noduplicatePoints[noduplicatePointsCount] + "\n";	
					noduplicatePointsCount++;
					continue;
				}			
				found=0;
				j=0;
				for(j=0;j<noduplicatePointsCount;j++)
				{
					string compxy[];
					strsplit(compxy, noduplicatePoints[j], ',');	
					if(distanceBetweenPoints(strtod(xy[0]),strtod(xy[1]),strtod(compxy[0]),strtod(compxy[1]))<=0.025)
					{
						found=1;
						break;
					}
				}
				if(found==0)
				{
					noduplicatePoints[noduplicatePointsCount]=xy[0] + ","+ xy[1];
					//pointsArray += noduplicatePoints[noduplicatePointsCount] + "\n";
					noduplicatePointsCount++;
				}
			}
			polywidth = xy[2];
			tracestring+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\""+netName+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":\""+polywidth+"\",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[";
			for(i=0;i<noduplicatePointsCount;i++)
			{
				if(i<noduplicatePointsCount-1)
					tracestring+="\n\t\t\t\t\t\t\t[" + noduplicatePoints[i]+"],";
				else
					tracestring+="\n\t\t\t\t\t\t\t[" + noduplicatePoints[i];
			}
			tracestring+= "]\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
			//tracestring+=">--------"+polywidth+"------>\n\n";
		}
		
	}	
	return tracestring;// + "\n/*"+traceSegments+"*/\n" ;
  //tracestring+=pointsArray+"\n\n" + itos(noduplicatePointsCount);
     
}  //end GetTracesNew

string GetPolygons()
{
	string polygons="";
	//return polygons;
	int watchdog_counter=0;
	int watchdog_expires=0;
	//dlgMessageBox(itos(watchdog_expires));
	board(B) 
	{
	  B.signals(S) 
	  {
		S.polygons(P) 
		{
			P.contours(W)
			{
				watchdog_expires++;
			}
		}
	  }	
	  B.signals(S) 
	  {
		S.polygons(P) 
		{
		  int x0, y0, first = 1;
			int i = 1;
			int active;		  
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  //active = 0;
				  P.contours(W,i) 
				  {
					//active = 1;
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Pad_Type\":\"trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"1\",\n\t\t\t\t\"Rank\":\""+itos(P.rank)+"\",\n\t\t\t\t\"Index\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i++;
				  active++;
				  //watchdog_counter++;
				  //if(watchdog_counter>watchdog_expires)
					//active = 1;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}
		S.polygons(P) 
		{
		  int x0, y0, first = 1;
			int i = -1;
			int active=0;		  
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  //active = 0;
				  P.contours(W,i) 
				  {
					//active = 1;
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Pad_Type\":\"trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"0\",\n\t\t\t\t\"Rank\":\""+itos(P.rank)+"\",\n\t\t\t\t\"Index\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i--;
				  active++;
				  //watchdog_counter++;
				  //if(watchdog_counter>watchdog_expires)
				//	active = 1;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}		
	  }
	  watchdog_expires=0;
	  B.elements(E) 
	  {
	    UL_PACKAGE S = E.package;
		S.polygons(P) 
		{
			P.contours(W)
			{
				watchdog_expires++;
			}
		}
	  }	
	  B.elements(E) 
	  {
	    UL_PACKAGE S = E.package;
		S.polygons(P) 
		{
		 string Pad_Type="pad";
		 if(P.layer==LAYER_BOTTOM || P.layer==LAYER_TOP)
		   Pad_Type="pad";
		 else if(P.layer==LAYER_TSTOP || P.layer==LAYER_BSTOP)
		   Pad_Type="stop";
		  int x0, y0, first = 1;
			int i = 1;
			int active;		  
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  //active = 0;
				  P.contours(W,i) 
				  {
					//active = 1;
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"1\",\n\t\t\t\t\"Rank\":\""+itos(P.rank)+"\",\n\t\t\t\t\"Index\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i++;
				  active++;
				  //watchdog_counter++;
				  //if(watchdog_counter>watchdog_expires)
					//active = 1;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}
		S.polygons(P) 
		{
		 string Pad_Type="pad";
		 if(P.layer==LAYER_BOTTOM || P.layer==LAYER_TOP)
		   Pad_Type="trace";
		 else if(P.layer==LAYER_TSTOP || P.layer==LAYER_BSTOP)
		   Pad_Type="stop";		
		  int x0, y0, first = 1;
			int i = -1;
			int active=0;		  
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  //active = 0;
				  P.contours(W,i) 
				  {
					//active = 1;
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"0\",\n\t\t\t\t\"Rank\":\""+itos(P.rank)+"\",\n\t\t\t\t\"Index\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i--;
				  active++;
				  //watchdog_counter++;
				  //if(watchdog_counter>watchdog_expires)
				//	active = 1;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}		
	  }
		watchdog_expires=0;
		B.polygons(P) 
		{
			watchdog_expires++;
		}
		B.polygons(P) 
		{
		 string Pad_Type="pad";
		 string Feature_Type="pad";
		 if(P.layer==LAYER_BOTTOM || P.layer==LAYER_TOP)
		 {
		   Pad_Type="trace";
		   Feature_Type="trace";
		 }
		 else if(P.layer==LAYER_TSTOP || P.layer==LAYER_BSTOP)
		 {
		   Pad_Type="stop";	
		   Feature_Type="pad";
		  }
		  int x0, y0, first = 1;
		  int i = 1;
		  int active;		
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  P.contours(W,i) 
				  {
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\""+Feature_Type+"\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"POLY"+GenerateID()+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"0\",\n\t\t\t\t\"Rank\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i++;
				  active++;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}	
		B.polygons(P) 
		{
		 string Pad_Type="pad";
		 string Feature_Type="pad";
		 if(P.layer==LAYER_BOTTOM || P.layer==LAYER_TOP)
		 {
		   Pad_Type="trace";
		   Feature_Type="trace";
		 }
		 else if(P.layer==LAYER_TSTOP || P.layer==LAYER_BSTOP)
		 {
		   Pad_Type="stop";	
		   Feature_Type="pad";
		  }		
		  int x0, y0, first = 1;
		  int i = -1;
		  int active;		
		  if(strlen(TraceSide(P.layer))>5)
		  {
			  do
			  {
				  P.contours(W,i) 
				  {
					if (first) 
					{
					  // a new partial polygon is starting
					  x0 = W.x1;
					  y0 = W.y1;
					  polygons+= "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\""+Feature_Type+"\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"POLY"+GenerateID()+"\",\n\t\t\t\t\"XY_Loc\":[0,0],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Hatched\":\""+itos(P.pour)+"\",\n\t\t\t\t\"Spacing\":\""+rtos(GetDimInBoardUnits(P.spacing))+"\",\n\t\t\t\t\"Positive\":\"0\",\n\t\t\t\t\"Rank\":\""+itos(i)+"\",\n\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(P.width))+",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n[";
					}
					// ...
					// do something with the wire
					// ...
					polygons += "[" + rtos(GetDimInBoardUnits(W.x1)) + ","+ rtos(GetDimInBoardUnits(W.y1))+",0],";
					if (first)
					  first = 0;
					else if (W.x2 == x0 && W.y2 == y0) 
					{
						polygons += "[" + rtos(GetDimInBoardUnits(W.x2)) + ","+ rtos(GetDimInBoardUnits(W.y2))+",0]";
						polygons+= "]}}},";
					  // this was the last wire of the partial polygon,
					  // so the next wire (if any) will be the first wire
					  // of the next partial polygon
					  first = 1;
					}
				  }
				  i--;
				  active++;
				//	break;
			   }while (active<watchdog_expires);
		  }
		}	  
	}
	return polygons;
}


string GetTraces()
{
	string tracestring="";
	string side="";
	int prevSideLength=0;
	int currSideLength=0;
	real prevWidth=0;
	real currWidth=0;
	real prevX2=0;
	real prevY2=0;
	int newsignal=0;
  //temp string used with sprintf	
	board(B) 
	{
		B.signals(S) 
		{
			newsignal=0;
			S.wires(P) 				//here you get pieces of wire
			{
				//if(P.layer==16)
				//{
				//dlgMessageBox(itos(P.layer));
				side=TraceSide(P.layer);
				if(strlen(side)>1)
				{
					currSideLength=strlen(side);
					currWidth=GetDimInBoardUnits(P.width);		
					if (P.arc)
					{
						if(newsignal==1)
						{
							newsignal=0;
							tracestring[strlen(tracestring)-1]='\0';
							tracestring+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
						}
						UL_WIRE W = P;
						real deg2rad = 0.0174532925; //used to convert degress to radians for arc parsing
						string outlinePoints[]; //holds points extracted from board
						string outlinePointsSorted[];  //holds points after they are sorted
						real bx1 = 0.0, by1 = 0.0, bx2 = 0.0, by2 = 0.0; //line start and end points
						//used for drawing arc lines
						real incx = 0.0, incy = 0.0;  //store incremental x/y values for arc
						real currentAngle = 0.0, incrementAngle = 10.0;
						int wireCount = 0;
						string temp;							
						bx1 = GetDimInBoardUnits(P.arc.x1);
						by1 = GetDimInBoardUnits(P.arc.y1);
						
						 //for arc Get data to generate points
						 real angle1 = W.arc.angle1, angle2 = W.arc.angle2, centerx =
								   GetDimInBoardUnits(W.arc.xc), centery =
								   GetDimInBoardUnits(W.arc.yc);
						 real endx = bx2, endy = by2; //store arc end points to close arc.
						 //reset current angle value
						 currentAngle = incrementAngle;
						 //determine which direction to draw arc by Getting x/y points based on angle1
						 incx = (cos(deg2rad * (angle1))
								   * GetDimInBoardUnits(W.arc.radius)) + centerx;
						 incy = (sin(deg2rad * (angle1))
								   * GetDimInBoardUnits(W.arc.radius)) + centery;
						 //check if arc start points match calculated start points using angle1. if they do then its a counter clockwise drawn arc
						 if (CompareReals(incx, bx1) && CompareReals(incy, by1)) {
							  ///loop thru 5 deg increments
							  //arc defined counter clockwise so you need to subtract the increment
							  while ((angle1 + currentAngle) < angle2) {
								   incx = (cos(deg2rad * (angle1 + currentAngle))
											 * GetDimInBoardUnits(W.arc.radius))
											 + centerx;
								   incy = (sin(deg2rad * (angle1 + currentAngle))
											 * GetDimInBoardUnits(W.arc.radius))
											 + centery;
								   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx, incy);
								   outlinePoints[wireCount] = temp;
								   currentAngle += incrementAngle;
								   wireCount++;
								   //update beginning x/y values
								   bx1 = incx;
								   by1 = incy;
							  }  //end while
						 } else {
							  ///loop thru 5 deg increments
							  //arc defined counter clockwise so you need to subtract the increment
							  while ((angle2 - currentAngle) > angle1) {
								   incx = (cos(deg2rad * (angle2 - currentAngle))
											 * GetDimInBoardUnits(W.arc.radius))
											 + centerx;
								   incy = (sin(deg2rad * (angle2 - currentAngle))
											 * GetDimInBoardUnits(W.arc.radius))
											 + centery;
								   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx,
											 incy);
								   outlinePoints[wireCount] = temp;
								   currentAngle += incrementAngle;
								   wireCount++;
								   //update beginning x/y values
								   bx1 = incx;
								   by1 = incy;
							  }  //end while
						 }  //end if/else for check on direction of arc
						 //close arc
						 sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, endx, endy);
						 outlinePoints[wireCount] = temp;
						 wireCount++;
						
						
						for (int i = 0; i < wireCount; i++)
						{
							if (i==0)
							{
								tracestring+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetX1FromPtString(outlinePoints[i]))+", "+rtos(GetY1FromPtString(outlinePoints[i]))+"],";
							}
							else
							{
								if(i == wireCount-1)
								{
									tracestring+= "\n\t\t\t\t\t\t\t["+rtos(GetX1FromPtString(outlinePoints[i])) + "," + rtos(GetY1FromPtString(outlinePoints[i])) + "],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.arc.x2))+","+ rtos(GetDimInBoardUnits(P.arc.y2)) +"]\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
								}
								else
									tracestring+= "\n\t\t\t\t\t\t\t["+rtos(GetX1FromPtString(outlinePoints[i])) + "," + rtos(GetY1FromPtString(outlinePoints[i])) + "],";
							}
						}						
					}
					else		//straight lines
					{
						//dlgMessageBox("("+itos(currSideLength)+" == "+itos(prevSideLength)+") && ("+rtos(currWidth)+"=="+rtos(prevWidth)+") && ("+rtos(GetDimInBoardUnits(P.x1))+"=="+rtos(prevX2)+") && ("+rtos(GetDimInBoardUnits(P.y1))+"=="+rtos(prevY2)+")");
						if((currSideLength == prevSideLength) && (currWidth==prevWidth) && (GetDistBetweenPts(GetDimInBoardUnits(P.x1),prevX2,GetDimInBoardUnits(P.y1),prevY2)<0.025))	//continuation of the same trace
						{
							tracestring+= "\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) + "],";
						}
						else
						{
							if(newsignal==0)
							{
								tracestring+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"],";
								newsignal=1;
							}
							else
							{
								tracestring[strlen(tracestring)-1]='\0';
								tracestring+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
								tracestring+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"Layer\":\""+side+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2))+"],";
								//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
							}
						}
						
						prevWidth = currWidth;
						prevSideLength = currSideLength;
						prevX2 = GetDimInBoardUnits(P.x2);
						prevY2 = GetDimInBoardUnits(P.y2);
					}     
				}   
				//}
			}	
			if(newsignal==1)
			{
				newsignal=0;
				tracestring[strlen(tracestring)-1]='\0';
				tracestring+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
			}
		}
	}	
	return tracestring;
}



int CountWireHoles(int tracelayer) 
{
     int holeCount = 0;
     board(BRD)
     {
          BRD.circles(C)
          {
               if (C.layer == tracelayer) {
                    holeCount++;
               }
          }
     }  //end board loop

     return holeCount;

}  //end func

real Tolerance = GetTolerance();

string GetEmnBoardOutline(string top,string bottom) {

     /*
      Board outline logic
      --------------------
      1. Loop thru wires on layer 20 and parse out points based on type of wire.
      Wire can be either arc or line. If it Is an arc then the .arc property Is set to 1.

      2. For lines extract the start and end points. For arcs you need to convert them in
      to a set of lines that simulates an arc by drawing a line at angle increments.

      3. After looping thru the wires on layer 20 verify that wires were actually found.
      If none were found then exit the ulp and notify the user no lines were found on layer 20.

      4. Once the points are loaded to the array they need to reordered so that they are written in the correct order in the outline. This Is
      due to fact that the loop thru .wires provides the wires in the order they were drawn and not necessarily in the correct order.
      To accomplish this you need to first fine the start point. I do this by finding the point closest to 0,0.

      5. Once the line with a start point closest to 0,0 Is found I then look thru the points to find a match for the end point of the first line.
      The lines may not be written in end point to start point so you need to check for closet match on both the start and end.

      6. After sorting the lines you can now write out the points to the board_outline section. I check for matches from end to start points.
      If a match Isnt found then I assume a new outline Is found and increment the counter. I also need to make sure that when a new outline Is found that the prev
      outline Is closed.
      */

     //init vars
     int Debug = 1; //used for debugging and generation of log in board outline processing
     string logFilePath = filesetext(GetBoardPath(), ".log");
     string BoardThickness = GetBoardThickness();
	 
     string boardOutlineSection = ",\n\n\"Parts\":\n\t{\n\t\n\t\"Board_Part\":\n\t\t{\n\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\"Part_Name\":\"untitled\",\n\t\t\"Units\": \"Global\",\n\t\t\"Type\":\"Unspecified\",\n\t\t\"Phy_Layers\":[\n\t\t\t\t{ \n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\", \n\t\t\t\t\"Layer_Name\":\""+bottom+"\", \n\t\t\t\t\"Type\": \"Conductive\",\n\t\t\t\t\"Position\":\"1\",\n\t\t\t\t\"Thickness\":\"0.05\" \t\n\t\t\t\t},\n\t\t\t\t\n\t\t\t\t{ \n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\", \n\t\t\t\t\"Layer_Name\": \"Dielectric_Middle\", \n\t\t\t\t\"Type\":\"Dielectric\", \n\t\t\t\t\"Position\":\"2\", \n\t\t\t\t\"Thickness\":\"" + rtos(strtod(BoardThickness) - 0.1) + "\" \n\t\t\t\t},\n\t\t\t\t{\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\", \n\t\t\t\t\"Layer_Name\":\""+top+"\", \n\t\t\t\t\"Type\":\"Conductive\", \n\t\t\t\t\"Position\":\"3\", \n\t\t\t\t\"Thickness\":\"0.05\" \n\t\t\t\t}\t\t\t\n\t\t],\n\t\t\t\"Shape\":\n\t\t\t{\n\t\t\t\"Extrusion\":\n\t\t\t\t{\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Top_Height\":\"" + BoardThickness + "\",\n\t\t\t\t\"Bot_Height\":\"0\",\n\t\t\t\t\"Outline\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n";
     int wireCount = 0;

     string outlinePoints[]; //holds points extracted from board
     string outlinePointsSorted[];  //holds points after they are sorted

     real deg2rad = 0.0174532925; //used to convert degress to radians for arc parsing

     real bx1 = 0.0, by1 = 0.0, bx2 = 0.0, by2 = 0.0; //line start and end points
     real startX = 0.0, startY = 0.0;
     int outlineNum = 0;

     //used for drawing arc lines
     real incx = 0.0, incy = 0.0;  //store incremental x/y values for arc
     real currentAngle = 0.0, incrementAngle = 10;

     string temp;  //temp string used with sprintf

     int newOutline = 1;
     string pad = ",";

     real minDist = -1.0;  //used to keep track of min distance found
     real dist = 0.0; //used to store distance between two points

     string fromPoints, toPoints;
     string boardOutlineSectionDebug;

     int matchFound = 0;

     /*   Step 1 & 2   */
     //loop thru layer 20 and wires on layer
     board(BRD)
     {
          //loop thru wires
          BRD.wires(W)
          {

               //only pull layer 20 wires
               if (W.layer == strtol(WireLayer)) {
                    //get wire start and end points

                    //get x/y for start and end.
                    bx1 = GetDimInBoardUnits(W.x1), by1 = GetDimInBoardUnits(W.y1), bx2 =
                              GetDimInBoardUnits(W.x2), by2 = GetDimInBoardUnits(W.y2);

                    //handle arcs and lines differently
                    if (W.arc) {
                         //for arc Get data to generate points
                         real angle1 = W.arc.angle1, angle2 = W.arc.angle2, centerx =
                                   GetDimInBoardUnits(W.arc.xc), centery =
                                   GetDimInBoardUnits(W.arc.yc);
                         real endx = bx2, endy = by2; //store arc end points to close arc.
                         //reset current angle value
                         currentAngle = incrementAngle;
                         //determine which direction to draw arc by Getting x/y points based on angle1
                         incx = (cos(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centerx;
                         incy = (sin(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centery;
                         //check if arc start points match calculated start points using angle1. if they do then its a counter clockwise drawn arc
                         if (CompareReals(incx, bx1) && CompareReals(incy, by1)) {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle1 + currentAngle) < angle2) {
                                   incx = (cos(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx, incy);
                                   outlinePoints[wireCount] = temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         } else {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle2 - currentAngle) > angle1) {
                                   incx = (cos(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx,
                                             incy);
                                   outlinePoints[wireCount] = temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         }  //end if/else for check on direction of arc
                         //close arc
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, endx, endy);
                         outlinePoints[wireCount] = temp;
                         wireCount++;
                    } else {
                         //process lines
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, bx2, by2);

                         outlinePoints[wireCount] = temp;

                         wireCount++;

                    }  //end if for arc
               }  //end if check for layer=20
          }  //end loop thru wires
		
		BRD.elements(E)
		{
			UL_PACKAGE PAC = E.package;
			PAC.wires(W)
			{

               //only pull layer 20 wires
               if (W.layer == strtol(WireLayer)) {
                    //get wire start and end points

                    //get x/y for start and end.
                    bx1 = GetDimInBoardUnits(W.x1), by1 = GetDimInBoardUnits(W.y1), bx2 =
                              GetDimInBoardUnits(W.x2), by2 = GetDimInBoardUnits(W.y2);

                    //handle arcs and lines differently
                    if (W.arc) {
                         //for arc Get data to generate points
                         real angle1 = W.arc.angle1, angle2 = W.arc.angle2, centerx =
                                   GetDimInBoardUnits(W.arc.xc), centery =
                                   GetDimInBoardUnits(W.arc.yc);
                         real endx = bx2, endy = by2; //store arc end points to close arc.
                         //reset current angle value
                         currentAngle = incrementAngle;
                         //determine which direction to draw arc by Getting x/y points based on angle1
                         incx = (cos(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centerx;
                         incy = (sin(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centery;
                         //check if arc start points match calculated start points using angle1. if they do then its a counter clockwise drawn arc
                         if (CompareReals(incx, bx1) && CompareReals(incy, by1)) {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle1 + currentAngle) < angle2) {
                                   incx = (cos(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx, incy);
                                   outlinePoints[wireCount] = temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         } else {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle2 - currentAngle) > angle1) {
                                   incx = (cos(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx,
                                             incy);
                                   outlinePoints[wireCount] = temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         }  //end if/else for check on direction of arc
                         //close arc
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, endx, endy);
                         outlinePoints[wireCount] = temp;
                         wireCount++;
                    } else {
                         //process lines
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, bx2, by2);

                         outlinePoints[wireCount] = temp;

                         wireCount++;

                    }  //end if for arc
               }  //end if check for layer=20
			}  //end loop thru wires	
		}	//end loop through elements
	 }  //end loop thru board

     //if there are wireholes then consider those as part of the outline
     if ( CountWireHoles(strtol(WireLayer)) > 0) {

          board(B){
               B.circles(C){

                    if (C.layer == strtol(WireLayer)) {

                         real angle1 = 0;
                         real angle2 = 360;

                         real currentAngle = 0;

                         real radius = GetDimInBoardUnits(C.radius);
                         real centerx = GetDimInBoardUnits(C.x);
                         real centery = GetDimInBoardUnits(C.y);
                         real bx1 = centerx + radius;
                         real by1 = centery;

                         while ((angle1 + currentAngle) <= angle2) {

                              //handle first point where angle = 0
                              if( currentAngle == 0 ){
                                   incx = (cos(deg2rad * (angle1 + (incrementAngle/2))) * radius) + centerx;
                                   incy = (sin(deg2rad * (angle1 + (incrementAngle/2))) * radius) + centery;
                                   }
                              else{
                                   incx = (cos(deg2rad * (angle1 + currentAngle)) * radius) + centerx;
                                   incy = (sin(deg2rad * (angle1 + currentAngle)) * radius) + centery;
                                   }  //end if-else for current angle = 0

                              sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx1, by1, incx,incy);

                              outlinePoints[wireCount] = temp;

                              currentAngle += incrementAngle;

                              wireCount++;

                              //update beginning x/y values
                              bx1 = incx;
                              by1 = incy;
                              }  //end while

                         }  //end if for layer check

                    }  //end circle loop

               }  //end board loop

          } //wire holes if

     /*   Step 3 - Verify wires found   */
     if (wireCount == 0) {
          dlgMessageBox("No wires were found on layer 20.\nUnable to detect board outline. Exiting.");


          //add in check if user wants to use a component as the board outline
          if ( dlgMessageBox("No outlines were found on layer 20.\n\nWould you like to select a component to use as outline?\n\nIf you select No then the program will exit.", "&Yes", "&No") == 0) {
               //call function to get from component and then assign to ouline array
               //outlinePoints = getComponentOutlinePoints();
               }
          else{
               exit(0);
               }

          }  //end if for wirecount = 0 check


     if (Debug) {
          boardOutlineSectionDebug +=
                    "########### array before sorts ###########\n";

          for (int j = 0; j < wireCount; j++) {
               sprintf(temp, "%d\t%s", j, outlinePoints[j]);

               boardOutlineSectionDebug += temp;
          }  //end for
     }  //end if for debug

     /*   Step 4 & 5 - Verify wires found   */
     //loop thru points and sort so they are in order
     //outer loop thru points
     boardOutlineSectionDebug += "Tolerance=" + rtos(Tolerance) + ".\n";

     for (int i = 0; i < wireCount; i++) 
	 {

          //boardOutlineSection += itos( outlineNum ) + pad +
          //                              rtos( GetX1FromPtString( outlinePoints[ i ] ) ) + pad +
          //                              rtos( GetY1FromPtString( outlinePoints[ i ] ) ) + pad + "0\n";

          outlinePoints[i] = SetUsedFlag(outlinePoints[i]);

          //get line end points
          bx2 = GetX2FromPtString(outlinePoints[i]);
          by2 = GetY2FromPtString(outlinePoints[i]);

          //handle initializations, new outlines, and closed outline checks.
          if (i == 0) 
		  {
               startX = GetX1FromPtString(outlinePoints[i]);
               startY = GetY1FromPtString(outlinePoints[i]);

               boardOutlineSection += "\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Line_Color\": [0.0, 0.0, 0.0], \n\t\t\t\t\t\t\"Fill_Color\":[0.0, 0.0, 0.0],\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t[" 
                         + rtos(GetX1FromPtString(outlinePoints[i])) + pad
                         + rtos(GetY1FromPtString(outlinePoints[i])) + ",0],\n";

               newOutline = 0;
          }
          else if (newOutline) 
		  {		
				//cutouts go here
               startX = GetX1FromPtString(outlinePoints[i]);
               startY = GetY1FromPtString(outlinePoints[i]);

               boardOutlineSection +=  "\t\t\t\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Cutout\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Outline\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":{\n\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Line_Color\":[0.0, 0.0, 0.0],\n\t\t\t\t\t\t\"Fill_Color\":[0.0, 0.0, 0.0],\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t[" 
                         + rtos(GetX1FromPtString(outlinePoints[i])) + pad
                         + rtos(GetY1FromPtString(outlinePoints[i])) +  ",0],\n";

               newOutline = 0;
          }
          //check if point closes outline
          else if (GetDistBetweenPts(startX, startY,
                    GetX2FromPtString(outlinePoints[i]),
                    GetY2FromPtString(outlinePoints[i])) == 0) 
			{
					//end of path
					if(outlineNum==0)
					boardOutlineSection +=  "\t\t\t\t\t\t\t[" 
                         + rtos(GetX2FromPtString(outlinePoints[i])) + pad
                         + rtos(GetY2FromPtString(outlinePoints[i]))+ pad + "0]\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t}\n\t\t\t}, \n\t\t\"Features\":\n\t\t\t[ \n";
					else
					boardOutlineSection +=  "\t\t\t\t\t\t\t[" 
                         + rtos(GetX2FromPtString(outlinePoints[i])) + pad
                         + rtos(GetY2FromPtString(outlinePoints[i]))+ pad + "0]\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";						 
               outlineNum++;
               newOutline = 1;
               continue;
          }  //end if
          else if (GetDistBetweenPts(startX, startY,
                    GetX2FromPtString(outlinePoints[i]),
                    GetY2FromPtString(outlinePoints[i])) <= Tolerance) {
               boardOutlineSection +=  "\t\t\t\t\t\t\t[" + rtos(startX) + pad
                         + rtos(startY) + pad + ",0],\n";
               outlineNum++;
               newOutline = 1;
               continue;
          }  //end if

          matchFound = 0;

          //inner loop thru points to find matching line
          for (int j = 0; j < wireCount; j++) {

               //boardOutlineSectionDebug += "Checking points for i=" + itos( i ) + " and j=" + itos( j ) + ".\n";

               //check if line Is already used. if it Is then skip it
               if (!IsUsedPoint(outlinePoints[j])) {

                    //check for exact match on line start
                    if (GetDistBetweenPts(bx2, by2,
                              GetX1FromPtString(outlinePoints[j]),
                              GetY1FromPtString(outlinePoints[j])) == 0) {

                         boardOutlineSectionDebug += "*Exact match for i=" + itos(i)
                                   + " and j=" + itos(j) + ".\n";
                         boardOutlineSectionDebug += "*i point " + outlinePoints[i];

                         boardOutlineSection +=  "\t\t\t\t\t\t\t[" 
                                   + rtos(GetX1FromPtString(outlinePoints[j])) + pad
                                   + rtos(GetY1FromPtString(outlinePoints[j])) + pad
                                   + "0],\n";

                         //flag points as used
                         outlinePoints[j] = SetUsedFlag(outlinePoints[j]);

                         //swap matched point with current point
                         //outlinePoints = swapPoints( outlinePoints, (i+1), j );

                         toPoints = outlinePoints[j];
                         fromPoints = outlinePoints[(i + 1)];

                         //move toIndex to from position
                         outlinePoints[(i + 1)] = toPoints;
                         outlinePoints[j] = fromPoints;

                         matchFound = 1;

                         break;
                    }
                    //check for exact match on line end
                    else if (GetDistBetweenPts(bx2, by2,
                              GetX2FromPtString(outlinePoints[j]),
                              GetY2FromPtString(outlinePoints[j])) == 0) {
                         boardOutlineSectionDebug += "*Exact match for i=" + itos(i)
                                   + " and j=" + itos(j) + ".\n";
                         boardOutlineSectionDebug += "*i point " + outlinePoints[i];

                         boardOutlineSection += "\t\t\t\t\t\t\t[" 
                                   + rtos(GetX2FromPtString(outlinePoints[j])) + pad
                                   + rtos(GetY2FromPtString(outlinePoints[j])) + pad
                                   + "0],\n";

                         //flag point as used
                         outlinePoints[j] = SetUsedFlag(outlinePoints[j]);

                         boardOutlineSectionDebug += "\t*Before flip \t"
                                   + outlinePoints[j];

                         //flip point
                         outlinePoints[j] = FlipPoints(outlinePoints[j]);

                         boardOutlineSectionDebug += "\t*After flip \t"
                                   + outlinePoints[j];

                         //swap matched point with current point
                         //outlinePoints = swapPoints( outlinePoints, (i+1), j );

                         toPoints = outlinePoints[j];
                         fromPoints = outlinePoints[(i + 1)];

                         //move toIndex to from position
                         outlinePoints[(i + 1)] = toPoints;
                         outlinePoints[j] = fromPoints;

                         matchFound = 1;

                         break;
                    }
                    //check for Tolerance match on line start
                    else if (GetDistBetweenPts(bx2, by2,
                              GetX1FromPtString(outlinePoints[j]),
                              GetY1FromPtString(outlinePoints[j])) <= Tolerance) {

                         boardOutlineSectionDebug += "*Tolerance match for i="
                                   + itos(i) + " and j=" + itos(j) + ". Dist="
                                   + rtos(
                                             GetDistBetweenPts(bx2, by2,
                                                       GetX1FromPtString(outlinePoints[j]),
                                                       GetY1FromPtString(
                                                                 outlinePoints[j]))) + "\n";
                         boardOutlineSectionDebug += "*i point " + outlinePoints[i];

                         boardOutlineSection += "\t\t\t\t\t\t\t[" + rtos(bx2)
                                   + pad + rtos(by2) + pad + "0],\n";

                         boardOutlineSectionDebug += "\t*Before fix for Tolerance \t"
                                   + outlinePoints[j];

                         //update matched point start points to prev line end points to fix the gap
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n", bx2, by2,
                                   GetX2FromPtString(outlinePoints[j]),
                                   GetY2FromPtString(outlinePoints[j]));

                         outlinePoints[j] = temp;

                         boardOutlineSectionDebug += "\t*After fix for Tolerance \t"
                                   + outlinePoints[j];

                         //flag points as used
                         outlinePoints[j] = SetUsedFlag(outlinePoints[j]);

                         //swap matched point with current point
                         //outlinePoints = swapPoints( outlinePoints, (i+1), j );

                         toPoints = outlinePoints[j];
                         fromPoints = outlinePoints[(i + 1)];

                         //move toIndex to from position
                         outlinePoints[(i + 1)] = toPoints;
                         outlinePoints[j] = fromPoints;

                         matchFound = 1;

                         break;
                    }
                    //check for Tolerance match on line end
                    else if (GetDistBetweenPts(bx2, by2,
                              GetX2FromPtString(outlinePoints[j]),
                              GetY2FromPtString(outlinePoints[j])) <= Tolerance) {

                         boardOutlineSectionDebug += "*Tolerance match for i="
                                   + itos(i) + " and j=" + itos(j) + ". Dist="
                                   + rtos(
                                             GetDistBetweenPts(bx2, by2,
                                                       GetX2FromPtString(outlinePoints[j]),
                                                       GetY2FromPtString(
                                                                 outlinePoints[j]))) + "\n";
                         boardOutlineSectionDebug += "*i point " + outlinePoints[i];

                         boardOutlineSection += "\t\t\t\t\t\t\t[" + rtos(bx2)
                                   + pad + rtos(by2) + pad + "0],\n";

                         boardOutlineSectionDebug += "\t*Before fix for Tolerance \t"
                                   + outlinePoints[j];

                         //update matched point start points to prev line end points to fix the gap
                         sprintf(temp, "%f\t%f\t%f\t%f\tn\n",
                                   GetX1FromPtString(outlinePoints[j]),
                                   GetY1FromPtString(outlinePoints[j]), bx2, by2);

                         outlinePoints[j] = temp;

                         boardOutlineSectionDebug += "\t*After fix for Tolerance \t"
                                   + outlinePoints[j];

                         //flag points as used
                         outlinePoints[j] = SetUsedFlag(outlinePoints[j]);

                         boardOutlineSectionDebug += "\t*Before flip \t"
                                   + outlinePoints[j];

                         //flip point
                         outlinePoints[j] = FlipPoints(outlinePoints[j]);

                         boardOutlineSectionDebug += "\t*After flip \t"
                                   + outlinePoints[j];

                         //swap matched point with current point
                         //outlinePoints = swapPoints( outlinePoints, (i+1), j );

                         toPoints = outlinePoints[j];
                         fromPoints = outlinePoints[(i + 1)];

                         //move toIndex to from position
                         outlinePoints[(i + 1)] = toPoints;
                         outlinePoints[j] = fromPoints;

                         matchFound = 1;

                         break;
                    }
                    //else line has not matching point.
                    else {
                         //boardOutlineSectionDebug += "No match for i=" + itos( i ) + " and j=" + itos( j ) + ".\n";

                    }  //end if-else

               } else {
                    //do nothing for skipped line
                    //boardOutlineSectionDebug += "Points skipped for i=" + itos( i ) + " and j=" + itos( j ) + ".\n";
               }  //end if/else

          }  //end j loop

          //check to make sure a matching point was found. if not notify user and mark on board.
          if (!matchFound) {
               boardOutlineSectionDebug += "No match for i=" + itos(i) + ".\n";

               //if no match found then generate circle command and exit.
               string circleDefectCommands;
               string runCommands;

               sprintf(circleDefectCommands, "CIRCLE (%f %f) (%f %f);",
                         BackConvertDimensions(bx2), BackConvertDimensions(by2),
                         BackConvertDimensions(bx2 + 2.0),
                         BackConvertDimensions(by2));

               //delete existing Debug layer if it exists
               runCommands += RemoveIDFDebugLayerCommands();

               //get Debug layer number
               string debugLayerNum = GetIDFDebugLayerAvailNum();

               //dlgMessageBox( "A fatal defect was found in your board outline in the form\n" +
               //     "of a gap in the board outline. We cannot repair this defect.\n\n" +
               //     "Defects will be shown on layer " + debugLayerNum + " with red circles." );

               dlgMessageBox(
                         "An error was found in your board outline that cannot be automatically repaired.  Outlines must be enclosed loops.\n"
                                   + "Defects will be shown on layer " + debugLayerNum
                                   + " with red circles.");

               string wireCommands = "change width 0.01;\nSET Wire_Bend 2;\n";

               if (Debug) {
                    boardOutlineSectionDebug +=
                              "########### array after sorts ###########\n";

                    //build wire commands that will draw the outlines that have been matched. the last wire will be drawn but it has no match
                    for (int j = 0; j < wireCount; j++) {
                         sprintf(temp, "%d\t%s", j, outlinePoints[j]);
                         boardOutlineSectionDebug += temp;

                         if (IsUsedPoint(outlinePoints[j])) {
                              wireCommands += "WIRE ( "
                                        + rtos(
                                                  BackConvertDimensions(
                                                            GetX1FromPtString(
                                                                      outlinePoints[j])))
                                        + " "
                                        + rtos(
                                                  BackConvertDimensions(
                                                            GetY1FromPtString(
                                                                      outlinePoints[j])))
                                        + ") ("
                                        + rtos(
                                                  BackConvertDimensions(
                                                            GetX2FromPtString(
                                                                      outlinePoints[j])))
                                        + " "
                                        + rtos(
                                                  BackConvertDimensions(
                                                            GetY2FromPtString(
                                                                      outlinePoints[j])))
                                        + ");";
                         }
                    }  //end for
               }  //end if

               //circleDefectCommands = "LAYER 100 IDFDebug;SET COLOR_LAYER 100 red;CHANGE WIDTH 0.01;" +
               //removed change width comand
               runCommands += "LAYER " + debugLayerNum + " IDFDebug;"
                         + "SET COLOR_LAYER " + debugLayerNum + " red;"
                         + circleDefectCommands + wireCommands + "DISPLAY NONE;"
                         + "DISPLAY 20 " + debugLayerNum + ";" + "WINDOW FIT;";

               if (Debug) {
                    WriteToFile(logFilePath,
                              boardOutlineSectionDebug + "***************\n"
                                        + runCommands + "***************\n"
                                        + boardOutlineSection);
               }

               exit(runCommands);
          }  //end if for matchfound

     }  //end i loop

     if (Debug) {
          boardOutlineSectionDebug +=
                    "########### array after sorts ###########\n";

          for (int j = 0; j < wireCount; j++) {
               sprintf(temp, "%d\t%s", j, outlinePoints[j]);

               boardOutlineSectionDebug += temp;
          }  //end for
     }  //end if

     if (Debug) {
          WriteToFile(logFilePath,
                    boardOutlineSectionDebug + "***************\n"
                              + boardOutlineSection);
     }

     //boardOutlineSection += ".END_BOARD_OUTLINE\n";

     return boardOutlineSection;
}  //end GetEmnBoardOutline




string callNewtraces(int layer)
{
	string ret="";
 
     string tracestring = "";
     int wireCount = 0;
	real prevwidth=-1;
     string outlinePoints; //holds points extracted from board
	
     real deg2rad = 0.0174532925; //used to convert degress to radians for arc parsing

     real bx1 = 0.0, by1 = 0.0, bx2 = 0.0, by2 = 0.0; //line start and end points
     //used for drawing arc lines
     real incx = 0.0, incy = 0.0;  //store incremental x/y values for arc
     real currentAngle = 0.0, incrementAngle = 10;

     string temp;  //temp string used with sprintf
	 string netname="";
	board(B) 
	{
		B.signals(S) 
		{
    // board(BRD)
     //{
          //loop thru wires
		  outlinePoints="";
          S.wires(W)
          {
               if (W.layer == layer) 
			   {
					netname = S.name;
                    //get wire start and end points
                    //get x/y for start and end.
                    bx1 = GetDimInBoardUnits(W.x1), by1 = GetDimInBoardUnits(W.y1), bx2 =
                              GetDimInBoardUnits(W.x2), by2 = GetDimInBoardUnits(W.y2);
                    //handle arcs and lines differently
                    if (W.arc) {
                         //for arc Get data to generate points
                         real angle1 = W.arc.angle1, angle2 = W.arc.angle2, centerx =
                                   GetDimInBoardUnits(W.arc.xc), centery =
                                   GetDimInBoardUnits(W.arc.yc);
                         real endx = bx2, endy = by2; //store arc end points to close arc.
                         //reset current angle value
                         currentAngle = incrementAngle;
                         //determine which direction to draw arc by Getting x/y points based on angle1
                         incx = (cos(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centerx;
                         incy = (sin(deg2rad * (angle1))
                                   * GetDimInBoardUnits(W.arc.radius)) + centery;
                         //check if arc start points match calculated start points using angle1. if they do then its a counter clockwise drawn arc
                         if (CompareReals(incx, bx1) && CompareReals(incy, by1)) {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle1 + currentAngle) < angle2) {
                                   incx = (cos(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle1 + currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\t%f\n,", bx1, by1, incx, incy,GetDimInBoardUnits(W.width));
                                   outlinePoints+= temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         } else {
                              ///loop thru 5 deg increments
                              //arc defined counter clockwise so you need to subtract the increment
                              while ((angle2 - currentAngle) > angle1) {
                                   incx = (cos(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centerx;
                                   incy = (sin(deg2rad * (angle2 - currentAngle))
                                             * GetDimInBoardUnits(W.arc.radius))
                                             + centery;
                                   sprintf(temp, "%f\t%f\t%f\t%f\t%f\n,", bx1, by1, incx, incy,GetDimInBoardUnits(W.width));
                                   outlinePoints+= temp;
                                   currentAngle += incrementAngle;
                                   wireCount++;
                                   //update beginning x/y values
                                   bx1 = incx;
                                   by1 = incy;
                              }  //end while
                         }  //end if/else for check on direction of arc
                         //close arc
                         sprintf(temp, "%f\t%f\t%f\t%f\t%f\n,", bx1, by1, endx, endy,GetDimInBoardUnits(W.width));
                         outlinePoints+= temp;
                         wireCount++;
                    } else {
                         //process lines
                         sprintf(temp, "%f\t%f\t%f\t%f\t%f\n,", bx1, by1, bx2, by2,GetDimInBoardUnits(W.width));
                         outlinePoints+= temp;
                         wireCount++;
                    }  //end if for arc
					//prevwidth = W.width;
               }  //end if check for layer=20
          }  //end loop thru wires
		// }  //end loop thru board		
		if(strlen(outlinePoints)>3)
			ret+=sortTraces(outlinePoints,netname,TraceSide(layer));
		}
	}
	return ret;
}

string GetEmnDrilledHoles(int enable_via_pads) {

     string drilledHolesSection = "";
     string temp;
	real holescaling=0.50;		//the drill element return the diameter and we need the radius. So multiply by 0.5
     int holeCount = 0;
	string sideMap[] = { "Conductor_Top", "Conductor_Bottom" };
     board(BRD)
     {
          //loop thru holes
          BRD.holes(H)
          {
               sprintf(temp, "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Hole\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Type\":\"Tooling\",\n\t\t\t\t\"Plated\":\"False\",\n\t\t\t\t\"Shape_Type\":\"Round\",\n\t\t\t\t\"Outline\":\n\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0, 0],\n\t\t\t\t\t\t\"Radius\":\"%0.2f\"\n\t\t\t\t\t}\n\t\t\t\t},\n\t\t\t\t\"XY_Loc\": [%0.2f,%0.2f],\n\t\t\t\t\"Rotation\":\"0.0\"\n\t\t\t\t},\n",
                         (GetDimInBoardUnits(H.drill*holescaling)), (GetDimInBoardUnits(H.x)),
                         (GetDimInBoardUnits(H.y)));

               drilledHolesSection += temp;

               holeCount++;
          }  //end holes

          //get any holes from packages on elements
          BRD.elements(E)
          {
               E.package.holes(C)
               {
                    sprintf(temp, "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Hole\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Type\":\"Tooling\",\n\t\t\t\t\"Plated\":\"False\",\n\t\t\t\t\"Shape_Type\":\"Round\",\n\t\t\t\t\"Outline\":\n\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0, 0],\n\t\t\t\t\t\t\"Radius\":\"%0.2f\"\n\t\t\t\t\t}\n\t\t\t\t},\n\t\t\t\t\"XY_Loc\": [%0.2f,%0.2f],\n\t\t\t\t\"Rotation\":\"0.0\"\n\t\t\t\t},\n",
                              (GetDimInBoardUnits(C.drill*holescaling)),
                              (GetDimInBoardUnits(C.x)), (GetDimInBoardUnits(C.y))); //E.name

                    drilledHolesSection += temp;

                    holeCount++;
               }  //end package.holes

               E.package.contacts(P)
               {
                    if (P.pad) 
					{	
						//make these non plated holes as there will be pad to go with it.
                         sprintf(temp, "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Hole\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Type\":\"Thru_Pin\",\n\t\t\t\t\"Plated\":\"True\",\n\t\t\t\t\"Shape_Type\":\"Round\",\n\t\t\t\t\"Outline\":\n\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0, 0],\n\t\t\t\t\t\t\"Radius\":\"%0.2f\"\n\t\t\t\t\t}\n\t\t\t\t},\n\t\t\t\t\"XY_Loc\": [%0.2f,%0.2f],\n\t\t\t\t\"Rotation\":\"0.0\"\n\t\t\t\t},\n",
                                   GetDimInBoardUnits(P.pad.drill*holescaling),
                                   GetDimInBoardUnits(P.x), GetDimInBoardUnits(P.y));
                         drilledHolesSection += temp;
                         holeCount++;
                    }  //end if
               }  //end loop thru contacts

          }  //end elements

          //get any holes on vias
		  int vianumber=0;
          BRD.signals(S)
          {
               S.vias(V)
               {
					if(V.diameter[LAYER_TSTOP]>0.05 && enable_via_pads!=0)
					{
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Layer\":\""+sideMap[0]+"\",\n\t\t\t\t\"Type \":\"Via\",\n\t\t\t\t\"Testpoint\":\"False\",\n\t\t\t\t\"Net_Name\":\"Via"+itos(vianumber)+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(V.x)) + " , " + rtos(GetDimInBoardUnits(V.y))+ "],\n\t\t\t\t\"Rotation\":\"0.00\",\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(V.diameter[LAYER_TSTOP],0,V.shape[LAYER_TOP]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
						drilledHolesSection += temp;
						vianumber++;
					}
					if(V.diameter[LAYER_BSTOP]>0.05 && enable_via_pads!=0)
					{
						temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Layer\":\""+sideMap[1]+"\",\n\t\t\t\t\"Type \":\"Via\",\n\t\t\t\t\"Testpoint\":\"False\",\n\t\t\t\t\"Net_Name\":\"Via"+itos(vianumber)+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(V.x)) + " , " + rtos(GetDimInBoardUnits(V.y))+ "],\n\t\t\t\t\"Rotation\":\"0.00\",\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(V.diameter[LAYER_BSTOP],0,V.shape[LAYER_BOTTOM]) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
						drilledHolesSection += temp;		
						vianumber++;
					}					
                    sprintf(temp, "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Hole\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Type\":\"Thru_Pin\",\n\t\t\t\t\"Plated\":\"True\",\n\t\t\t\t\"Shape_Type\":\"Round\",\n\t\t\t\t\"Outline\":\n\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0, 0],\n\t\t\t\t\t\t\"Radius\":\"%0.2f\"\n\t\t\t\t\t}\n\t\t\t\t},\n\t\t\t\t\"XY_Loc\": [%0.2f,%0.2f],\n\t\t\t\t\"Rotation\":\"0.0\"\n\t\t\t\t},\n",
                              (GetDimInBoardUnits(V.drill*holescaling)),
                              (GetDimInBoardUnits(V.x)), (GetDimInBoardUnits(V.y)));
                    drilledHolesSection += temp;
                    holeCount++;
               }
          }
     }  //end board loop

     //close drilled holes section
     //drilledHolesSection += ".END_DRILLED_HOLES\n";

     //check if drilled holes Is empty and if so clear it
     if (holeCount == 0) {
          drilledHolesSection = "";
     }

     return drilledHolesSection;
}  //end sub
string endParts()
{
	return "{\"Part_end\":\"True\"}\n\t\t\t]\n\t\t},\n";
}

string getFileNameWithoutExtension(string file_name)
{
	int n = strlen(file_name)-4;
	return strsub(file_name, 0, n);
}
string GetEmnPlacements() {

     string sideMap[] = { "TOP", "BOTTOM" };

     string placementSection;

     string footprint1;
     string altname;
     string ref_id;

     string components[];
     string component;
     string temp;
     string side;
     string height;
	 string boardName;
     board(BRD)
     {
          boardName = getFileNameWithoutExtension(filename(BRD.name));
		  
     }
     placementSection = "";
	 placementSection += ",\n\"Assemblies\":\n\t{\n\t\"Board_Assembly\":\n\t\t{\n\t\t\"Entity_ID\" : \"#" + GenerateID() + "\",\n\t\t\"Assy_Name\":\"Board_Assembly\",\n\t\t\"Part_Number \":\"Board_Assembly\",\n\t\t\"Units\":\"Global\",\n\t\t\"Type\":\"Traditional\",\n\t\t\n\t\t\"Board_Inst\":\n\t\t\t{\n\t\t\t\"Board_Part_Instance\":\n\t\t\t\t{\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Part_Name\":\"" + boardName + "\",\n\t\t\t\t\"Refdes\":\"Unassigned\",\n\t\t\t\t\"XY_Loc\":[0.0, 0.0],\n\t\t\t\t\"Rotation\":\"0.0\"\n\t\t\t\t} \t\t\t \n\t\t\t},\n\t\t\t\n\t\t\"Comp_Insts\":\n\t\t\t[\n";
     //loop thru elements on board
	//string fileName1;
    //fileName1 = dlgFileSave("Select a directory to write Pick and Place files to:", "*.csv *.*");
	//output(fileName1)
	
     board(BRD)
     {
		  //printf("Designator,Mid X,Mid Y,Layer,Rotation\n");
          int i = 0;

          BRD.elements(E)
          {

//               LibraryLookup = lookup(Libraries, strupr(E.package.library), 0);
//
//               //logic to setup footprint an altname values
//               if (LibraryLookup != "") {
//                    //if found in LibraryLookup then assign package name to both footprint and altname
//                    altname = E.package.name;
//                    footprint = E.package.name;
//               } else 
			   if (E.value != "") {
                    //if e.value Is not empty then put it in the footprint
                    altname = E.value;
                    footprint1 = E.package.name;
               } else {
                    //if library Is not in list and the E.value Is blank then concat refid and package name
                    altname = E.name + "_" + E.package.name;
                    footprint1 = E.package.name;
               }  //end if-else

               footprint1 = CleanString(footprint1);
               altname = CleanString(altname);

               ref_id = E.name;
               ref_id = CleanString(ref_id);

               //get side value based on mirror value
               side = sideMap[E.mirror];

               //check if height set for element. if not set then set to NULL_HEIGHT
               height = GetElementHeightAttr( E );

               //if height is not set then set to default
               if (height == NULL_HEIGHT) {
                    height = "1.0";  //set to value of 1.0
                    }

               //if default height then dont append to altname. otherwise put unique height on altname
              // if( height == "1.0" ){
                    sprintf(temp, "\n\t\t\t{\n\t\t\t\t\"Type\":\"Electrical_Part_Instance\",\n\t\t\t\t\"Entity_ID\":\"#" + GenerateID() + "\",\n\t\t\t\t\"Part_Name\":\"%s\",\n\t\t\t\t\"Part_Number\": \"%s\",\n\t\t\t\t\"In_BOM\":\"True\",\n\t\t\t\t\"Refdes\":\"%s\",\n\t\t\t\t\"Lock\":\"None\",\n\t\t\t\t\"XY_Loc\":[%f, %f],\n\t\t\t\t\"Side\":\"%s\",\n\t\t\t\t\"Rotation\": %f,\n\t\t\t\t\"Mnt_Offset\":[0, 0]\n\t\t\t\t},", footprint1,
                         altname, ref_id, GetDimInBoardUnits(E.x),
                         GetDimInBoardUnits(E.y), side , E.angle);
					//if(side=="TOP")
					//	printf("%s,%fmm,%fmm,T,%3.0f\n",ref_id,GetDimInBoardUnits(E.x),GetDimInBoardUnits(E.y),E.angle);
					//else
					//	printf("%s,%fmm,%fmm,B,%3.0f\n",ref_id,GetDimInBoardUnits(E.x),GetDimInBoardUnits(E.y),E.angle);
                    //add component to components list
                    components[i] = footprint1 + "~" + altname;
					Elec_Part_Insts = Elec_Part_Insts+1;
              // }
               //else{
                 //   sprintf(temp, "%s %s %s\n%f %f 0 %f %s PLACED\n", footprint + "_" + height,
                //         altname + "_" + height, ref_id, GetDimInBoardUnits(E.x),
                //         GetDimInBoardUnits(E.y), E.angle, side);

                    //add component to components list
                //    components[i] = footprint + "_" + height + "~" + altname + "_" + height;

               //}  //end if-else

               placementSection += temp;

               i++;
          }  //end loop thru elements
     }  //end loop thru board
     
	 placementSection[strlen(placementSection)-1]='\0';
     placementSection += "\t\t\t]                        \n\t\t}                        \n\t}";

     return placementSection;
}  //end sub

string splitlasttwo(string data,int xy_only,string leftstring_new)
{
	string ret="";
	string temp="";
	string temp1="";
	int startpos= 0;
	if(xy_only==1)
		startpos=strstr(data,"XY_Pts");
	else
		startpos=strstr(data,"Vertices");
	string leftstring="";
	string zeropad="";
	if(xy_only==1)
		zeropad="";
	else
		zeropad=",0";
	if(startpos>=0)		//Found the vertices then proceed to rotation
	{
		leftstring=strsub(data,0,startpos+8);
		string strtemp=strsub(data,startpos+8);
		startpos = strstr(strtemp,")");
		strtemp = strsub(strtemp,1,startpos-2);
		startpos = strstr(strtemp,"(");
		if(startpos>=0)
			strtemp = strsub(strtemp,startpos+1);
		string split[];
		int pieces = strsplit(split,deblank(strtemp),'\n');
		for(int i=0;i<pieces-1;i++)
		{
			split[i]=deblank(split[i]);
			if(strlen(split[i])>2)
			{
				string xy[];
				strsplit(xy,split[i],',');
				if(i==pieces-2)
					ret+="\t\t\t\t\t\t\t\t"+xy[0]+","+xy[1]+zeropad+"\n\t\t\t\t\t\t\t)";
				else
					ret+="\t\t\t\t\t\t\t\t"+xy[0]+","+xy[1]+zeropad+",\n";
			}
		}
		if(xy_only==1)
			temp+= leftstring+"\t\t\t\t\t\t\t(\n"+ret+"\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);\n";
		else
			temp+= leftstring+"\t\t\t\t\t\t\t(\n"+ret+"\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);               /* End Trace */\n";
		
		ret= "";
		
		for(i=pieces-2;i<pieces;i++)
		{
			split[i]=deblank(split[i]);
			if(strlen(split[i])>2)
			{
				string xy[];
				strsplit(xy,split[i],',');
				if(i==pieces-1)
					ret+="\t\t\t\t\t\t\t\t"+xy[0]+","+xy[1]+zeropad+"\n\t\t\t\t\t\t\t)";
				else
					ret+="\t\t\t\t\t\t\t\t"+xy[0]+","+xy[1]+zeropad+",\n";
			}
		}
		if(xy_only==1)
			temp1+= leftstring_new+"\n\t\t\t\t\t\t\t(\n"+ret+"\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);\n";
		else
			temp1+= leftstring_new+"\n\t\t\t\t\t\t\t(\n"+ret+"\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);               /* End Trace */\n";	
		
		return temp+temp1;
	}
	else
		return "error";
}

string getStops()
{
	string ret="";
	string temp="";
	real effAngle=0;
	board(B) 
	{
		B.circles(C)
		{			
			if(C.layer==LAYER_TSTOP || C.layer==LAYER_BSTOP || C.layer==LAYER_BOTTOM || C.layer==LAYER_TOP)
			{
				 string Pad_Type="pad";
				 if(C.layer==LAYER_BOTTOM || C.layer==LAYER_TOP)
				 {
				   Pad_Type="trace";
				 }
				 else if(C.layer==LAYER_TSTOP || C.layer==LAYER_BSTOP)
				 {
				   Pad_Type="stop";	
				  }			
				if(C.width<C.radius*2)
				{
					ret+="\t\t\t\t\{\n\t\t\t\t\"Feature_Type\":\"trace\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(C.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":\""+rtos(GetDimInBoardUnits(C.width))+"\",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
					temp = arcToLines(0,360,GetDimInBoardUnits(C.radius),GetDimInBoardUnits(C.x+C.radius),GetDimInBoardUnits(C.y),GetDimInBoardUnits(C.x),GetDimInBoardUnits(C.y),1,2,0);
					//temp[strlen(temp)-2] = '\0';
					ret+= temp;
					ret+="\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
				}
				else
				{
					ret+="\t\t\t\t\{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(C.layer)+"\",\n\t\t\t\t\"Type\":\"Pin\",\n\t\t\t\t\"Testpoint\":\"False\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"XY_Loc\":["+rtos(GetDimInBoardUnits(C.x))+","+rtos(GetDimInBoardUnits(C.y))+"],\n\t\t\t\t\"Rotation\":[0.00],\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Circle\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"XY_Loc\":[0.0, 0.0],\n\t\t\t\t\t\t\"Radius\":"+rtos(GetDimInBoardUnits((C.width/2)+C.radius))+"\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
				}
			}
			//else
			//	ret+= "//----------------------------"+itos(C.layer)+"--------------------------------------//\n";
			
		}
		B.rectangles(R)
		{
			if(R.layer==LAYER_TSTOP || R.layer==LAYER_BSTOP || R.layer==LAYER_BOTTOM || R.layer==LAYER_TOP)
			{
				 string Pad_Type="pad";
				 if(R.layer==LAYER_BOTTOM || R.layer==LAYER_TOP)
				 {
				   Pad_Type="pad";
				 }
				 else if(R.layer==LAYER_TSTOP || R.layer==LAYER_BSTOP)
				 {
				   Pad_Type="stop";	
				  }					
				real cx = (R.x1+R.x2)/2;
				real cy = (R.y1+R.y2)/2;
				real w = abs(R.x1-R.x2);
				real h = abs(R.y1-R.y2);
				temp="\t\t\t\t\{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\""+Pad_Type+"\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+TraceSide(R.layer)+"\",\n\t\t\t\t\"Type\":\"Unspecified\",\n\t\t\t\t\"Testpoint\":\"False\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"XY_Loc\":["+rtos(GetDimInBoardUnits(cx))+" , "+rtos(GetDimInBoardUnits(cy))+"],\n\t\t\t\t\"Rotation\":[0.00],\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polycurve_Area\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Vertices\":\n\t\t\t\t\t\t\t[";
				temp+= 	"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0],"+
						"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(h/2))+ ",0],"+
						"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(w/2)) + "," + rtos(GetDimInBoardUnits(h/2))+ ",0],"+
						"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0],"+
						"\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(-w/2)) + "," + rtos(GetDimInBoardUnits(-h/2))+ ",0]";
				temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}               /* End Curve */\n\t\t\t\t},\n";	
				effAngle = effectiveangle(R.angle,PAD_SHAPE_LONG);
				if(effAngle!=0)
					ret += rotateTranslatePad(temp,effAngle,0,0,0);
				else
					ret += temp;
			}
			//else
			//	ret+= "//----------------------------"+itos(R.layer)+"--------------------------------------//\n";
		}
	}
	return ret;
}

string getViaPads()
{
	string ret="";
	string temp="";
	board(B) 
	{
	  B.signals(S)
	  {
	    S.vias(V)
		{
		    int diameter=0;
			int shape=0;
			if(V.diameter[LAYER_TOP]>0.0125)
			{
				diameter = V.diameter[LAYER_TOP];
				shape = V.shape[LAYER_TOP];
				temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\"Conductor_Top\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(V.x)) + " , " + rtos(GetDimInBoardUnits(V.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,0,shape) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
				ret+=temp;
			}
			if(V.diameter[LAYER_BOTTOM]>0.0125)
			{
				diameter = V.diameter[LAYER_BOTTOM];
				shape = V.shape[LAYER_BOTTOM];
				temp = "\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Pad\",\n\t\t\t\t\"Pad_Type\":\"pad\",\n\t\t\t\t\"Entity_ID\":\"#"+GenerateID()+"\",\n\t\t\t\t\"Layer\":\"Conductor_Bottom\",\n\t\t\t\t\"Net_Name\":\""+S.name+"\",\n\t\t\t\t\"XY_Loc\":[" + rtos(GetDimInBoardUnits(V.x)) + " , " + rtos(GetDimInBoardUnits(V.y))+ "],\n\t\t\t\t\"Rotation \":0.00,\n\t\t\t\t\"Geometry\":\n\t\t\t\t\t{"+ WriteThPads(diameter,0,shape) + "\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
				ret+=temp;
			}
	    }
	  }
	}
	return ret;
}

string getSilkTraces()
{
	string padString="";
	string sideMap[] = { "Silkscreen_Top", "Silkscreen_Bottom" };
	string temp="";
	real effAngle = 0;
	real diameter=0;
	real prevWidth=1;
	real currWidth=0;
	real prevX2=0;
	real prevY2=0;
	int newsignal=0;
	int prevlayer=-1;
	int morethanone=0;
	board(B) 
	{
		B.elements(E)
		{
			//E.texts(T)
			//{
			//	T.wires(W)
			//	{
			//		if((W.layer==LAYER_TPLACE || W.layer==LAYER_TNAMES || W.layer==LAYER_TDOCU || W.layer==LAYER_BPLACE || W.layer==LAYER_BNAMES || W.layer==LAYER_BDOCU || W.layer==LAYER_TVALUES || W.layer==LAYER_BVALUES) && GetDimInBoardUnits(W.width)>0.0125)
			//		{
			//			currWidth=GetDimInBoardUnits(W.width);	
			//			if (W.arc)		//it's an arc
			//			{
			//				if(newsignal==1)
			//				{
			//					newsignal=0;
			//					padString[strlen(padString)-1]='\0';
			//					padString+= "\n\t\t\t\t\t\t\t)\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);\n";
			//				}					
			//				padString+="\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tLayer (\""+SilkScreenSide(W.layer)+"\"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(GetDimInBoardUnits(W.width))+"),\n\t\t\t\t\t\tXY_Pts\n\t\t\t\t\t\t\t(\n";
			//				temp = arcToLines(W.arc.angle1,W.arc.angle2,GetDimInBoardUnits(W.arc.radius),GetDimInBoardUnits(W.arc.x1),GetDimInBoardUnits(W.arc.y1),GetDimInBoardUnits(W.arc.xc),GetDimInBoardUnits(W.arc.yc),1,0,0);
			//				temp+= "\t\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.arc.x2))+","+ rtos(GetDimInBoardUnits(W.arc.y2));
			//				padString+= temp;
			//				padString+="\n\t\t\t\t\t\t\t)\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);               /* End Trace */\n";						
			//			}
			//			else
			//			{
			//				if((currWidth==prevWidth) && abs(W.x1-prevX2) < 0.025 && abs(W.y1-prevY2) < 0.025)	//continuation of the same trace
			//				{
			//					padString+= "\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) + ",";
			//				}
			//				else
			//				{
			//					if(newsignal==0)
			//					{
			//						padString+="\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(W.layer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(currWidth)+"),\n\t\t\t\t\t\tXY_Pts\n\t\t\t\t\t\t\t(\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) +",";
			//						newsignal=1;
			//					}
			//					else
			//					{
			//						padString[strlen(padString)-1]='\0';
			//						padString+="\n\t\t\t\t\t\t\t)\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);\n";
			//						padString+="\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(W.layer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(currWidth)+"),\n\t\t\t\t\t\tXY_Pts\n\t\t\t\t\t\t\t(\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2))+",";
			//						//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
			//					}
			//				}
			//				
			//				prevWidth = currWidth;
			//				prevX2 = (W.x2);
			//				prevY2 = (W.y2);						
			//			}
			//		}
			//	}
			//	if(newsignal==1)
			//	{
			//		newsignal=0;
			//		padString[strlen(padString)-1]='\0';
			//		padString+= "\n\t\t\t\t\t\t\t)\n\t\t\t\t\t\t)        /* End Polyline */\n\t\t\t\t\t)               /* End Curve */\n\t\t\t\t);\n";
			//	}			
			//}
			newsignal=0;
			UL_PACKAGE PAC = E.package;
			PAC.wires(W)
			{
				if((W.layer==LAYER_TPLACE || W.layer==LAYER_TNAMES || W.layer==LAYER_TDOCU || W.layer==LAYER_BPLACE || W.layer==LAYER_BNAMES || W.layer==LAYER_BDOCU || W.layer==LAYER_TVALUES || W.layer==LAYER_BVALUES) && GetDimInBoardUnits(W.width)>0.0125)
				{
					currWidth=GetDimInBoardUnits(W.width);	
					if (W.arc)		//it's an arc
					{
						if(newsignal==1)
						{
							newsignal=0;
							temp[strlen(temp)-1]='\0';
							temp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
							//if(morethanone==1)
							//	temp=splitlasttwo(temp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
							padString+= temp;
						}					
						padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(W.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
						temp = arcToLines(W.arc.angle1,W.arc.angle2,GetDimInBoardUnits(W.arc.radius),GetDimInBoardUnits(W.arc.x1),GetDimInBoardUnits(W.arc.y1),GetDimInBoardUnits(W.arc.xc),GetDimInBoardUnits(W.arc.yc),1,0,0);
						temp+= "\t\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.arc.x2))+","+ rtos(GetDimInBoardUnits(W.arc.y2))+"]";
						padString+= temp;
						padString+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";						
					}
					else
					{
						if((W.layer == prevlayer) && (currWidth==prevWidth) && GetDistBetweenPts(W.x1,prevX2,W.y1,prevY2) < 0.025)	//continuation of the same trace
						{
							temp+= "\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) + "],";
							morethanone=1;
						}
						else
						{
							if(newsignal==0)
							{
								temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) +"],";
								newsignal=1;
								morethanone=0;
							}
							else
							{
								temp[strlen(temp)-1]='\0';
								temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
								//if(morethanone==1)
								//	temp=splitlasttwo(temp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(W.layer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
								padString+= temp;
								temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2))+"],";
								morethanone=0;
								//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
							}
						}
						prevlayer=W.layer;
						prevWidth = currWidth;
						prevX2 = (W.x2);
						prevY2 = (W.y2);						
					}
					
				}
			}
			if(newsignal==1)
			{
				newsignal=0;
				temp[strlen(temp)-1]='\0';
				temp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
				//if(morethanone==1)
				//	temp=splitlasttwo(temp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
				padString+= temp;
			}
			PAC.texts(T)
			{
				T.wires(W)
				{
					if((W.layer==LAYER_TPLACE || W.layer==LAYER_TNAMES || W.layer==LAYER_TDOCU || W.layer==LAYER_BPLACE || W.layer==LAYER_BNAMES || W.layer==LAYER_BDOCU || W.layer==LAYER_TVALUES || W.layer==LAYER_BVALUES) && GetDimInBoardUnits(W.width)>0.0125)
					{
						currWidth=GetDimInBoardUnits(W.width);	
						if (W.arc)		//it's an arc
						{
							if(newsignal==1)
							{
								newsignal=0;
								padString[strlen(padString)-1]='\0';
								padString+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
							}					
							padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(W.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
						temp = arcToLines(W.arc.angle1,W.arc.angle2,GetDimInBoardUnits(W.arc.radius),GetDimInBoardUnits(W.arc.x1),GetDimInBoardUnits(W.arc.y1),GetDimInBoardUnits(W.arc.xc),GetDimInBoardUnits(W.arc.yc),1,0,0);
						temp+= "\t\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.arc.x2))+","+ rtos(GetDimInBoardUnits(W.arc.y2))+"]";
						padString+= temp;
						padString+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";						
						}
						else
						{
							if((currWidth==prevWidth) && abs(W.x1-prevX2) < 0.025 && abs(W.y1-prevY2) < 0.025)	//continuation of the same trace
							{
								padString+= "\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) + "],";
							}
							else
							{
								if(newsignal==0)
								{
									padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) +"],";
									newsignal=1;
								}
								else
								{
									padString[strlen(padString)-1]='\0';
									padString+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},";
									padString+="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2))+"],";
									//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
								}
							}
							
							prevWidth = currWidth;
							prevX2 = (W.x2);
							prevY2 = (W.y2);						
						}
					}
				}
				if(newsignal==1)
				{
					newsignal=0;
					padString[strlen(padString)-1]='\0';
					padString+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
				}			
			}
			PAC.circles(C)
			{	
				if((C.layer==LAYER_TPLACE || C.layer==LAYER_TNAMES || C.layer==LAYER_TDOCU || C.layer==LAYER_BPLACE || C.layer==LAYER_BNAMES || C.layer==LAYER_BDOCU || C.layer==LAYER_TVALUES || C.layer==LAYER_BVALUES) && GetDimInBoardUnits(C.width)>0.0125)
				{
					temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(C.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(C.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
					temp += arcToLines(0,360,GetDimInBoardUnits(C.radius),GetDimInBoardUnits(C.x+C.radius),GetDimInBoardUnits(C.y),GetDimInBoardUnits(C.x),GetDimInBoardUnits(C.y),1,1,0);
					temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
					//	temp=splitlasttwo(temp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(C.layer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(GetDimInBoardUnits(C.width))+"),\n\t\t\t\t\t\tXY_Pts");
					padString+= temp;
				}
				
			}
			PAC.rectangles(R)
			{
				
				if(R.layer==LAYER_TPLACE || R.layer==LAYER_TNAMES || R.layer==LAYER_TDOCU || R.layer==LAYER_BPLACE || R.layer==LAYER_BNAMES || R.layer==LAYER_BDOCU || R.layer==LAYER_TVALUES || R.layer==LAYER_BVALUES)
				{
					real cx = (R.x1+R.x2)/2;
					real cy = (R.y1+R.y2)/2;
					real w = abs(R.x1-R.x2);
					real h = abs(R.y1-R.y2);
					temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(R.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(w))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
					temp+="\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(cx)) + "," + rtos(GetDimInBoardUnits(cy-(h/2)))+ "],"+
						  "\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(cx)) + "," + rtos(GetDimInBoardUnits(cy+(h/2))) +"]";
					temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";	
					effAngle = effectiveangle(R.angle,PAD_SHAPE_LONG);
					if(effAngle!=0)
						padString += rotateTranslatePad(rotateTranslatePad(temp,effAngle,-GetDimInBoardUnits(cx),-GetDimInBoardUnits(cy),1),0,GetDimInBoardUnits(cx),GetDimInBoardUnits(cy),1);
					else
						padString += temp;
				}
				//else
				//	ret+= "//----------------------------"+itos(R.layer)+"--------------------------------------//\n";
			}			
		}
		B.texts(T)
		{
			morethanone=0;
			string padStringTemp="";
			T.wires(W)
			{
				if((W.layer==LAYER_TPLACE || W.layer==LAYER_TNAMES || W.layer==LAYER_TDOCU || W.layer==LAYER_BPLACE || W.layer==LAYER_BNAMES || W.layer==LAYER_BDOCU || W.layer==LAYER_TVALUES || W.layer==LAYER_TOP || W.layer==LAYER_BOTTOM || W.layer==LAYER_BVALUES) && GetDimInBoardUnits(W.width)>0.0125)
				{
					currWidth=GetDimInBoardUnits(W.width);	
					if (W.arc)		//it's an arc
					{
						if(newsignal==1)
						{
							newsignal=0;
							padStringTemp[strlen(padStringTemp)-1]='\0';
							padStringTemp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
							//if(morethanone==1)
							//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
							padString += padStringTemp;
							
						}					
						padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(W.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
						temp = arcToLines(W.arc.angle1,W.arc.angle2,GetDimInBoardUnits(W.arc.radius),GetDimInBoardUnits(W.arc.x1),GetDimInBoardUnits(W.arc.y1),GetDimInBoardUnits(W.arc.xc),GetDimInBoardUnits(W.arc.yc),1,0,0);
						temp+= "\t\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.arc.x2))+","+ rtos(GetDimInBoardUnits(W.arc.y2))+"]";
						padStringTemp+= temp;
						padStringTemp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
						padString += padStringTemp;
					}
					else
					{
						if((currWidth==prevWidth) && abs(W.x1-prevX2) < 0.025 && abs(W.y1-prevY2) < 0.025)	//continuation of the same trace
						{
							padStringTemp+= "\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) + "],";
							morethanone=1;
						}
						else
						{
							if(newsignal==0)
							{
								padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) +"],";
								newsignal=1;
							}
							else
							{
								padStringTemp[strlen(padStringTemp)-1]='\0';
								padStringTemp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
								//if(morethanone==1)
								//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
								padString += padStringTemp;
								padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2))+"],";
								//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
							}
						}
						prevlayer = W.layer;
						prevWidth = currWidth;
						prevX2 = (W.x2);
						prevY2 = (W.y2);						
					}
				}
			}
			if(newsignal==1)
			{
				newsignal=0;
				padStringTemp[strlen(padStringTemp)-1]='\0';
				padStringTemp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
				//if(morethanone==1)
				//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
				padString += padStringTemp;				
			}			
		}
		B.circles(C)
		{	
			if((C.layer==LAYER_TPLACE || C.layer==LAYER_TNAMES || C.layer==LAYER_TDOCU || C.layer==LAYER_BPLACE || C.layer==LAYER_BNAMES || C.layer==LAYER_BDOCU || C.layer==LAYER_TVALUES || C.layer==LAYER_BVALUES || C.layer==LAYER_TOP || C.layer==LAYER_BOTTOM) && GetDimInBoardUnits(C.width)>0.0125)
			{
				temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(C.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(C.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
				temp += arcToLines(0,360,GetDimInBoardUnits(C.radius),GetDimInBoardUnits(C.x+C.radius),GetDimInBoardUnits(C.y),GetDimInBoardUnits(C.x),GetDimInBoardUnits(C.y),1,1,0);
				temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
				//	temp=splitlasttwo(temp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(C.layer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(GetDimInBoardUnits(C.width))+"),\n\t\t\t\t\t\tXY_Pts");
				padString+= temp;
			}
			
		}
		B.rectangles(R)
		{
			if(R.layer==LAYER_TPLACE || R.layer==LAYER_TNAMES || R.layer==LAYER_TDOCU || R.layer==LAYER_BPLACE || R.layer==LAYER_BNAMES || R.layer==LAYER_BDOCU || R.layer==LAYER_TVALUES || R.layer==LAYER_BVALUES || R.layer==LAYER_TOP || R.layer==LAYER_BOTTOM)
			{
					real cx = (R.x1+R.x2)/2;
					real cy = (R.y1+R.y2)/2;
					real w = abs(R.x1-R.x2);
					real h = abs(R.y1-R.y2);
					temp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(R.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(w))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
					temp+="\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(cx)) + "," + rtos(GetDimInBoardUnits(cy-(h/2)))+ "],"+
						  "\n\t\t\t\t\t\t\t\t[" + rtos(GetDimInBoardUnits(cx)) + "," + rtos(GetDimInBoardUnits(cy+(h/2))) +"]";
					temp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t}\n\t\t\t\t},\n";
				effAngle = effectiveangle(R.angle,PAD_SHAPE_LONG);
				if(effAngle!=0)
					padString += rotateTranslatePad(rotateTranslatePad(temp,effAngle,-GetDimInBoardUnits(cx),-GetDimInBoardUnits(cy),1),0,GetDimInBoardUnits(cx),GetDimInBoardUnits(cy),1);
				else
					padString += temp;
			}
			//else
			//	ret+= "//----------------------------"+itos(R.layer)+"--------------------------------------//\n";
		}	
		morethanone=0;
		string padStringTemp="";
		B.wires(W)
		{
			if((W.layer==LAYER_TPLACE || W.layer==LAYER_TNAMES || W.layer==LAYER_TDOCU || W.layer==LAYER_BPLACE || W.layer==LAYER_BNAMES || W.layer==LAYER_BDOCU || W.layer==LAYER_TVALUES || W.layer==LAYER_BVALUES || W.layer==LAYER_TOP || W.layer==LAYER_BOTTOM) && GetDimInBoardUnits(W.width)>0.0125)
			{
				currWidth=GetDimInBoardUnits(W.width);	
				if (W.arc)		//it's an arc
				{
					if(newsignal==1)
					{
						newsignal=0;
						padStringTemp[strlen(padStringTemp)-1]='\0';
						padStringTemp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
						//if(morethanone==1)
						//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
						padString += padStringTemp;
						
					}					
					padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Line_Font\":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(GetDimInBoardUnits(W.width))+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n";
					temp = arcToLines(W.arc.angle1,W.arc.angle2,GetDimInBoardUnits(W.arc.radius),GetDimInBoardUnits(W.arc.x1),GetDimInBoardUnits(W.arc.y1),GetDimInBoardUnits(W.arc.xc),GetDimInBoardUnits(W.arc.yc),1,0,0);
					temp+= "\t\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.arc.x2))+","+ rtos(GetDimInBoardUnits(W.arc.y2))+"]";
					padStringTemp+= temp;
					padStringTemp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
					padString += padStringTemp;
				}
				else
				{
					if((currWidth==prevWidth) && abs(W.x1-prevX2) < 0.025 && abs(W.y1-prevY2) < 0.025)	//continuation of the same trace
					{
						padStringTemp+= "\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) + "],";
						morethanone=1;
					}
					else
					{
						if(newsignal==0)
						{
							padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font \":\"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2)) +"],";
							newsignal=1;
						}
						else
						{
							padStringTemp[strlen(padStringTemp)-1]='\0';
							padStringTemp+="\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
							//if(morethanone==1)
							//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
							padString += padStringTemp;
							padStringTemp="\n\t\t\t\t{\n\t\t\t\t\"Feature_Type\":\"Trace\",\n\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\"Net_Name\":\"PAD"+ GenerateID() +"\",\n\t\t\t\t\"Layer\":\""+SilkScreenSide(W.layer)+"\",\n\t\t\t\t\"Curve\":\n\t\t\t\t\t{\n\t\t\t\t\t\"Polyline\":\n\t\t\t\t\t\t{\n\t\t\t\t\t\t\"Entity_ID\":\"#"+ GenerateID() +"\",\n\t\t\t\t\t\t\"Start_Style\":\"Round\",\n\t\t\t\t\t\t\"End_Style\":\"Round\",\n\t\t\t\t\t\t\"Line_Font\": \"Solid\",\n\t\t\t\t\t\t\"Width\":"+rtos(currWidth)+",\n\t\t\t\t\t\t\"XY_Pts\":\n\t\t\t\t\t\t\t[\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x1))+", "+rtos(GetDimInBoardUnits(W.y1))+"],\n\t\t\t\t\t\t\t["+rtos(GetDimInBoardUnits(W.x2))+", "+rtos(GetDimInBoardUnits(W.y2))+"],";
							//tracestring+= "\n\nEnd previous and start new " +rtos(GetDimInBoardUnits(P.x1))+", "+rtos(GetDimInBoardUnits(P.y1)) + ",\n\t\t\t\t\t\t\t"+rtos(GetDimInBoardUnits(P.x2))+", "+rtos(GetDimInBoardUnits(P.y2)) +"," ;					
						}
					}
					prevlayer = W.layer;
					prevWidth = currWidth;
					prevX2 = (W.x2);
					prevY2 = (W.y2);						
				}
			}
		}
		if(newsignal==1)
		{
			newsignal=0;
			padStringTemp[strlen(padStringTemp)-1]='\0';
			padStringTemp+= "\n\t\t\t\t\t\t\t]\n\t\t\t\t\t\t}\n\t\t\t\t\t} \n\t\t\t\t},\n";
			//if(morethanone==1)
			//	padStringTemp=splitlasttwo(padStringTemp,1,"\t\t\tTrace\n\t\t\t\t(\n\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\tNet_Name (\"PAD"+ GenerateID() +"\"),\n\t\t\t\tLayer (\""+SilkScreenSide(prevlayer)+"\"),\n\t\t\t\tCurve\n\t\t\t\t\t(\n\t\t\t\t\tPolyline\n\t\t\t\t\t\t(\n\t\t\t\t\t\tEntity_ID (#"+ GenerateID() +"),\n\t\t\t\t\t\tStart_Style(\"Round\"),\n\t\t\t\t\t\tEnd_Style(\"Round\"),\n\t\t\t\t\t\tLine_Font (\"Solid\"),\n\t\t\t\t\t\tWidth ("+rtos(prevWidth)+"),\n\t\t\t\t\t\tXY_Pts");
			padString += padStringTemp;				
		}	
	}
	return padString;
}
string GenerateIDF() 
{

    //build emn file
	string assembly = GetEmnPlacements();
	string electricalComponents = GetEmpElectrical();
    string emn = "{"+GetEmnHeader(Elec_Part_Insts,Elec_Part_Defs) + assembly + GetEmnBoardOutline("Conductor_Top","Conductor_Bottom") + GetPolygons() + GetTraces()  +GetEmnDrilledHoles(1)+ GetPads() + getViaPads() + getStops() + endParts() + electricalComponents+"\t}}";
	//+callNewtraces(LAYER_TOP) + callNewtraces(LAYER_BOTTOM)
	//string emn = GetEmnHeader(Elec_Part_Insts,Elec_Part_Defs) + assembly + GetEmnBoardOutline("Conductor_Top","Conductor_Bottom") + GetTraces() +GetEmnDrilledHoles(1)+ GetPads()+ getStops() + endParts() + electricalComponents+"\t)";
	//string emn = GetEmnHeader(Elec_Part_Insts,Elec_Part_Defs) +  GetEmnBoardOutline("Conductor_Top","Conductor_Bottom") + GetTraces() + endParts() + "\t)";
	//string emn = GetEmnHeader(Elec_Part_Insts,Elec_Part_Defs) +  GetEmnBoardOutline() + GetTraces() + getStops() +GetEmnDrilledHoles()+ GetPads()+ endParts() + "\t)";
    return emn;
}  //end sub

string GenerateIDFWithSilkscreen()
{
	string assembly = GetEmnPlacements();
	string electricalComponents = GetEmpElectrical();
    string emn = "{"+GetEmnHeader(Elec_Part_Insts,Elec_Part_Defs) + assembly + GetEmnBoardOutline("Conductor_Top","Conductor_Bottom") +GetPolygons()+ GetTraces()  + getSilkTraces() +GetEmnDrilledHoles(1)+ GetPads() + getViaPads() + getStops() + endParts() + electricalComponents+"\t}}";
	return emn;
}

//main function to generate IDF fils
void GenerateIDFFiles() 
{
    if (!board) 
	{
        updateStatus("Works only in the layout editor.","red",1,0);
    }
	else
	{
		updateStatus("Processing . . .","blue",1,0);
		 dlgRedisplay();
		 //get board name
		 string boardName;
		 string boardDir;
		 board(BRD)
		 {
			  boardName = filename(BRD.name);
			  boardDir = filedir(BRD.name);
		 }  //end board
		 //get emn and emp strings
		 string IDFData = "";
		 //write strings to files
		 string fileName;
		 fileName = dlgFileSave("Select a directory to write JSON files to:", boardDir,"*.json *.*");
		 if(silkscreen==1)
		 {
			IDFData = GenerateIDFWithSilkscreen();//GenerateIDF();
			 //output(dirName + GetFileSeperator() + getFileNameWithoutExtension(boardName)+ "_with_silkscreen.json", "wt")
			 output(fileName)
			 {
				printf(IDFData);
			 }		 
		 }
		 else
		 {
			IDFData = GenerateIDF();
			 //output(dirName + GetFileSeperator() + getFileNameWithoutExtension(boardName)+ "_no_silkscreen.json", "wt")
			 output(fileName)
			 {
				printf(IDFData);
			 }			 
		 }
		 updateStatus("Board JSON File written successfully.","green",1,0);
		 dlgRedisplay();
	 }
    }  //end sub


//-----------------------------------------------------------------------------
// main section
//-----------------------------------------------------------------------------

void main() {

     //check to make sure board Is loaded
     string GithubLink = "https://github.com/lagnajeet/";
     string contactMeLink = "mailto:lagnajeet@gmail.com";
	 WireLayer=itos(LAYER_DIMENSION);

		int mainDlgResult = dlgDialog( "Board JSON Exporter" ) {
		 //main layout
		 dlgVBoxLayout {

			  //set width by creating a spacing hbox to drive width
			  if( IsWindows() ) {
				   //windows
				   dlgHBoxLayout dlgSpacing( 200 );//sets width
			  }
			  else {
				   //mac/linux
					dlgSpacing( 225 );//sets width
			  }  //end if-else
			  //set height and text view
			  dlgHBoxLayout {
				   dlgVBoxLayout{
				   //button group
				   dlgGroup("Board JSON Export Option") 
				   {
					   dlgCheckBox("Export Silkscreen", silkscreen);
					   dlgLabel("Board Thickness (in millimeters): ");
					   dlgStringEdit( BoardThickness );
				   }  //end group
					dlgGroup("Export") 
					{
						dlgHBoxLayout
						{
							dlgPushButton( "+Export JSON" ) {if (!board) {updateStatus("Works only in the layout editor.","red",1,0);}else{exit("Ratsnest;run eagleJSONexporter_v1_0.ulp createjson " + itos(silkscreen));}} 
							//dlgPushButton( "+Export JSON" ) {GenerateIDFFiles();}
							dlgPushButton( "About" ) {	int aboutDlgResult= dlgDialog("About") 
																			{
																				//dlgVBoxLayout dlgSpacing( 275 );
																				dlgVBoxLayout 
																				{
																				  //set width by creating a spacing hbox to drive width
																					  if( IsWindows() ) {
																						   //windows
																						   dlgHBoxLayout dlgSpacing( 200 );//sets width
																					  }
																					  else {
																						   //mac/linux
																						   dlgHBoxLayout dlgSpacing( 225 );//sets width
																					  }  //end if-else		
																					  dlgHBoxLayout
																					  {
																						dlgLabel("<font color='#000B92'><b>Autodesk Eagle IDF 4 Exporter.</b></font><br><br>This is one of my personal projects. I wrote this small ULP for eagle as none of the ECAD programs (especially Eagle) implemented IDF 4 even though the standard came out in 1998. That being said, this software comes with <i>absolutely no</i> warranty, guaranty or moneyback offer. Use it at your own risk.<br><br>You can contact me at <a href='mailto:lagnajeet@gmail.com'><font color='blue'>lagnajeet@gmail.com</font></a>.");
																						
																					  }
																					  dlgHBoxLayout
																					  {
																						//dlgPushButton( "Email" ) {LaunchBrowser( contactMeLink );};
																						dlgPushButton( "Github" ) {LaunchBrowser( GithubLink );};
																						dlgStretch(1);
																						dlgPushButton( "Close" ) {dlgReject();};
																					  }
																				 }
																			};
													};
							dlgPushButton( "Exit" ){ dlgReject();exit("RIPUP @;");}
						}
					}
					dlgGroup("Status") 
					{
						dlgLabel(status_msg, 1);
					}				
				   }  //end vbox for options
			  }  //end hbox layout			  
		 }  //end v box layout	 
			if(argc>1)
			{
				string command = argv[1];
				silkscreen = strtol(argv[2]);
				if(command=="createjson")
				{
					GenerateIDFFiles();
				}
			}		 
	};  //end mainDlgResult
		
}  //end main